Jaichim24
Sr. Member
Hey all, I was reading some other posts and googling around trying to find the exact differences between the SE and the SE PRO. When the PRO first came out I had been under the impression that the only difference was the coil. Reading around a bit more, several years later I've found references to slight differences in the grip, a faster processor, updated firmware for 2010, and perhaps (if it's different than the firmware) some differences in the software. I'm a bit interested in the change to the processor, and the firmware/software. If it's a faster processor, it could possible lead to a faster response. The firmware could just be tweeks to the software for better ID and more accurate information relayed, and perhaps better utilization of the faster processor.
I can't find any reference to the actual speed of the process on the SE and SE PRO. I know the eTRAC has a 32bit 48mhz processor. Anyone have this type of information for the SE and SE PRO. Can anyone confirm or support some of the other changes I've heard were made?
My SE is at Minelab being serviced and I may ask about upgrading, just wondering if it'd be worth it, I've heard it could cost between 300-400 dollars.
Thanks,
Jai
I can't find any reference to the actual speed of the process on the SE and SE PRO. I know the eTRAC has a 32bit 48mhz processor. Anyone have this type of information for the SE and SE PRO. Can anyone confirm or support some of the other changes I've heard were made?
My SE is at Minelab being serviced and I may ask about upgrading, just wondering if it'd be worth it, I've heard it could cost between 300-400 dollars.
Thanks,
Jai