Explorer XS lower shaft

[hgordon906]

The lower shaft tip of my Explorer XS wobbles alot. Even with the stock coil it acted loose but since I put a 12X15 SEF coil on it, it is almost unbearable. Does anyone have a fix for this? Thanks

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[dld]

maybe wrap some tape around it

 

[jgo]

The lower shaft tip of my Explorer XS wobbles alot.

Loose, as in it is about to look like mine did: http://forum.treasurenet.com/index.php/topic,425202.0.html


I mixed some flex coat rod epoxy and reattached the tip. So far it has been rock solid: even with my SEF 12x15 attached.
I can't figure out the insert hyperlink function on this site - this is the epoxy I used: http://www.flexcoat.com/products/finishes-adhesives/rod-builders-epoxy-glue/

 

[relic lover]

The lower shaft tip of my Explorer XS wobbles alot.

Loose, as in it is about to look like mine did: http://forum.treasurenet.com/index.php/topic,425202.0.html


I mixed some flex coat rod epoxy and reattached the tip. So far it has been rock solid: even with my SEF 12x15 attached.
I can't figure out the insert hyperlink function on this site - this is the epoxy I used: http://www.flexcoat.com/products/finishes-adhesives/rod-builders-epoxy-glue/

Good idea

 

[Iron Patch]

The carbon fiber lower shafts aren't expensive to buy. The old white ones can break and ruin your day... worth the $30 or whatever it is to upgrade.

 

[NGE]

$50.00 for etrac lower shaft......NGE