gast 263 hose setup

[Kozygold77]

I am in the process of setting up a gast 263 hookah system off a honda. Gx160 I was wondering how you have the hoses and fittings setup
1. Quick connect to braided stainless steel whip (1/4 inch or 3/8?) to metal resivour tank

2 divers do a t one to gauge one to diver 1 and another to diver 2

where do you put the air filter?

What regulator do you use with the gast 263

I have a 50 psi check valve on the compressor

Thanks for all the help

 

Amazon Forum Fav 👍

Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector for Experts with Tone ID & Adjustable Sensitivity - Grab it through Amazon!

[lukdiver]

Way we've been diving Gast for 40 years (ykkks) is either SS whip (silicon linied) or we've been using green oxygen hose available at welding shops and crimped 5/16" Ox net on end. Believe it or not reservoir(s) we've used are coke-cola syrup tanks. They are SS and made by Coirnelius and handle pressure fine and if you unthread the fitting a 5/16" Ox fitting threads right on. They have that access port on top that's secured with a cam-mechanism and allows you access to dump moisture and clean-out. The quick-disconnect fittings (believe it or not but they don't rust)sold at Harbor Freight which are 1/4" ips are what we use to disconnect hoses. They also sell a brass manifold fitting for multiple hoses.