HELP! Jolly Rogers headphones

[Brewha08]

Well like an idiot I was walking quickly through the woods with my headphones on and machine in hand. My cord managed to get stuck on a branch and I pulled to hard and pulled the wire right out of my Jolly Rogers. I'd love to fix them self but have no idea where the wires go. I have a cut red white and black wire in the cord going to headphone and need to know where they go. I took pictures to show you my conundrum. Thanks in advance for the help!

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[Kray Gelder]

I feel your pain, but I can't help.

 

[gunsil]

Dang it Luke, if I were there I'd lend you one of my spare pairs. Maybe give Detector Pro a call, hopefully they can tell you. They are made here in N.Y. in Poughkeepsie.

 

[Loco-Digger]

I've sent my black widows in for a cord replacement a couple years ago. Cost me $25.

 

[Jeff In North Georgia]

Looks like the red wire broke, you can splice it or unsolder it from the switch and re-connect there.
Black wire goes on the other end of the switch where no wire is now.
White wire goes on the vol. pot, on the one position where no wire is now.

Use a large wire tie on the inside of the cup on the cable to help prevent it being pulled out again.

Jeff

 

[Jeff In North Georgia]

Looks like the red wire broke, you can splice it or unsolder it from the switch and re-connect there.
Black wire goes on the other end of the switch where no wire is now.
White wire goes on the vol. pot, on the one position where no wire is now.

Use a large wire tie on the inside of the cup on the cable to help prevent it being pulled out again.

Jeff

Did this help or did you send them in for repair?

 

[gunsil]

He sent them in for repair.