hi!i bought a used laser trident 2+coil 11x8 double d.i testing in manual gb and fixed disc=iron 2euro coin half dollar and quarter.machine can't see them up 15cm.is the normal?ithink something going wrong.if anyone know please help me
This is what you get with used Kellyco stuff. Sorry.
i buy it from ebay.air tests going very good.the problem is in ground.im
Experienced oparator.i forgot said ground is high mineral(black ground).
sensitivity setting after 10 in red zone.today ill test it normal mineralization ground. ill try man gr bal more negative.tell me settings vaquero for max depth
First, read the Tesoro Vaquero manual, or the specific manual for your Trident II.
You can find your manual here: Laser Manuals - Treasure World
Learn to "power balance" the ground balance. I could easily explain how, but you should probably find Monte's posts explaining his method of setting ground balance in disc mode. Set threshold at a low, steady hum. Set discrimination just past the "iron" marking - between iron and foil. Run sensitivity as high as you can without detector chirping when swinging over clean areas. Swing coil slowly and as close to ground as possible.
You're now set up for best depth, while discriminating out the smallest iron. Good luck.
today i test it in site i was search it 2months ago.i pick up 4 aluminium pieces 1old bullet 1coin 1975(17-19cm too loud fixed grbal)no one rust nail.