need help iding button

jndawson2727

Greenie
Oct 3, 2014
13
3
Primary Interest:
All Treasure Hunting

Attachments

  • ForumRunner_20141005_213311.png
    ForumRunner_20141005_213311.png
    230 KB · Views: 130
  • ForumRunner_20141005_213347.png
    ForumRunner_20141005_213347.png
    179.5 KB · Views: 119
  • ForumRunner_20141005_213506.png
    ForumRunner_20141005_213506.png
    178.2 KB · Views: 109
  • ForumRunner_20141005_213709.png
    ForumRunner_20141005_213709.png
    210.1 KB · Views: 131
  • ForumRunner_20141005_213807.png
    ForumRunner_20141005_213807.png
    196.4 KB · Views: 134
OP
OP
J

jndawson2727

Greenie
Oct 3, 2014
13
3
Primary Interest:
All Treasure Hunting
Here are some more pics
 

Attachments

  • ForumRunner_20141006_182326.png
    ForumRunner_20141006_182326.png
    247.6 KB · Views: 111
  • ForumRunner_20141006_182336.png
    ForumRunner_20141006_182336.png
    259.5 KB · Views: 129
  • ForumRunner_20141006_182405.png
    ForumRunner_20141006_182405.png
    247.3 KB · Views: 115

mindcrime1988

Bronze Member
Apr 17, 2011
1,586
2,424
Southeast Pennsylvania
Detector(s) used
Garrett AT Pro, XP Deus II, DetectorPro Headhunter, BlissTool & Pulsedive
Primary Interest:
Metal Detecting
Some of your photos are not very clear so it is hard to tell. In your last photo it does not seem there are any markings on the backside of the button but once again the photo is not clear and you have it tilted away. Does the backside have any markings? If it does could you please get a clear shot of it? That would help a lot in identifying. Not saying I may be the one to do so but it will help everybody else out as well. Thanks.
 

OP
OP
J

jndawson2727

Greenie
Oct 3, 2014
13
3
Primary Interest:
All Treasure Hunting
No writing is on the back at all i wish there was! It sure would help me with id. and this thing is light as a feather! If you can see the front symobol well on top is a crown with a lion inside a shild surrounded by a wreath with two arrows going through it one on each side. The back is plane with the shank being cone shape with hole drilled out. Im really stumped on this one praying someone has seen one before or might have an idea of where to look.
 

Top Member Reactions

Users who are viewing this thread

Top