- Jun 9, 2013
- 5,321
- 6,919
- Detector(s) used
- White XLT Spectrum E-Series
- Primary Interest:
- Metal Detecting
Hey Viking.... I looked through some stuff and found a few items you might enjoy to try and experiment with. Some of these items will come in handy if you ever enter into the 3-D realm. And I have a couple of things for your hunting bow setup that might be of interest.
I did find an old rest that I believe will mount onto your bow and be VERY adjustable. Now with a little love given to it I'm sure it will clean right up and look brand new if you wanted it too. And I know your capable. This rest when mounted can be adjusted in and out (center-shot), back and forth and up and down. Now it appears to be just another overdraw bracket but it's not as the rest can be moved far forward toward bow riser and the bracket can also.
I also have a brand new still in case TOXONICS hunting sight. It's low power, large optic and has to be mounted on a sight bracket. It was given to me to try but I just never got around to it.
And I have some CHECK-IT micro-adjustable extended sights. 1 has a single hunting pin installed. And the other one has a 3-5 power scope mounted on it. Both are still fully functional.
If your interested in them just let me know and I'll ship them to ya.
Now the EASTON XX75's 2512's I have are all black shafts, no fletchings or nocks attached. I have the inserts. The reason I'm telling you this is because each shaft is 31" long and might work for ya.... MIGHT But I doubt you really know at this point how long they have to be until you get a solid anchor point and a permanent arrow rest mounted. Is this right...? Here's a few really bad pics (sorry).
I did find an old rest that I believe will mount onto your bow and be VERY adjustable. Now with a little love given to it I'm sure it will clean right up and look brand new if you wanted it too. And I know your capable. This rest when mounted can be adjusted in and out (center-shot), back and forth and up and down. Now it appears to be just another overdraw bracket but it's not as the rest can be moved far forward toward bow riser and the bracket can also.
I also have a brand new still in case TOXONICS hunting sight. It's low power, large optic and has to be mounted on a sight bracket. It was given to me to try but I just never got around to it.
And I have some CHECK-IT micro-adjustable extended sights. 1 has a single hunting pin installed. And the other one has a 3-5 power scope mounted on it. Both are still fully functional.
If your interested in them just let me know and I'll ship them to ya.
Now the EASTON XX75's 2512's I have are all black shafts, no fletchings or nocks attached. I have the inserts. The reason I'm telling you this is because each shaft is 31" long and might work for ya.... MIGHT But I doubt you really know at this point how long they have to be until you get a solid anchor point and a permanent arrow rest mounted. Is this right...? Here's a few really bad pics (sorry).