PVC Sand Scoops

[greydigger]

Has anyone marketed PVC sand scoops? It would seem to me a light weight thing.
Abrasion would be minimal. Stainless steel ( I think ) would be the best but they cost a lot.
Aluminum gets eaten up by salt. Perhaps the sand helps.
Want to build my own as I don't have a lot of money.

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[extractor]

I thought of that too, all said and done ,it was to much time and effort in the thing.I went down to a farm supply store and purchased a Feed Scoop for $3.50 and drilled a bunch of holes in it. Works great in dry sand .

 

[MOOREMAN123]

That looks pretty coll I think I'll have to go get me a feed scoop

 

[greydigger]

Well, that does look like it would work.
I was thinking of pipe tho with some thickness.
And a long handle so I wouldn't have to bend.
Have one in the making, will get some pics when done.

 

[roundhat]

somebody makes them and sells them for about 18 bucks on ebay.

 

[greydigger]

All I found were the modified feed scoops.

 

[greydigger]

Haven't tried the steel edge yet, working on this so far.
Has a nice 1/2" thick grate of fibreglass filled polyethylene to push with your foot.
Should be solid. Will find out how the leading edge holds up.

 

[extractor]

Sweet, it's looking pretty good.

 

[sniffer]

I would think ABS plastic would work better it's a little harder

 

[greydigger]

Maybe the back is ABS, but is glass filled for strength.
Want to be able to put my foot in it for the hard sand.
The ones with wire baskets look feeble to me for that.
Working on handle now. Want it to float.

 

[sniffer]

I bought one of the short handle aluminum ones, it bent the first time I used it

 

[greydigger]

So far, I am thinking 1/2" pvc that is sealed on both ends for flotation.
No metal involved so if target is in there my MD will tell me.
Am thinking of a side handle and arm brace like on crutches.
The back is SOLID so a little foot power helps in hard pack - not too much
pressure on the handle. What do you folks think?

 

[sniffer]

sounds like a great idea, might put a couple of holes in the end cap that way the water passes straight through as you lift it out of the water, that way sand isn't stuck in the bottom JMO

 

[greydigger]

Thanks Sniffer, think I got that covered. 1/8" slats in the back.
Hope this pic works.
Will put 1/2" mesh there on back inside.
What do you think about a side handle?

 

[sniffer]

side handle would probably work best, but the grate on the end won't be strong enough, i've stepped on them and broke out the center, also with the slats or slits in the bottom, coins have the ability to slide out through the slits, maybe a rounded end cap with 4 or 5 1/2 holes drilled in it. coins and rings can't get out but the sand and water should pass through and you can still use it as a sifter JMO

 

[greydigger]

My foot will not go thru 4" hole.
Here is a pic of the done deal.
Some mods are to be done, but minor ones.
Ya think I could sell these at the beach?
What price should I ask? LOL

 

[sniffer]

looks like it would work just fine

 

[busted leg beach bum]

A short piece of a swimmers noodle on the handle would ensure it floating, and actually helps with lifting the load in water.

 

[X-Terra70_TreasureHunter]

Hi Tnetters refer too this link

http://forum.treasurenet.com/index.php/topic,171491.0.html

 

[greydigger]

Tried the scoop yesterday on Sauvies Island on the Columbia river.
Actually, 2 scoops. My son had one also with a different detector.
I messed up and did not glue the top part on. Thought it would hold. LOL Did not. Kick plate worked good.
I was amazed at the outflow. The back had .080 mesh and I thought it would be a problem. But not.
Also I didn't know there were so many mexican beers. About 8 different kinds of bottle tops I found.
Dry sand went thru fast. The wet sand did not go thru very well. I was not in the water. Some shaking was required.
5/8" holes. Smaller than a dime. One quarter I got was very corroded. Cleaned off the tarnish and saw 185? .
Was a comerotive. Rats! The point of the trip was to see if the thing would work.