sunray x-1 problem

[capri_auto]

Hey maybe someone can help me out with this. Recently my explorer started acting up with a lot of falsing from both the coil and probe. It will false when i just moce it in the air weather the probe is on or off. Took the probe off and all is fine without it so it has to be the unit. Did some diagnostics and found that when i tap on the switch it causes falsing. all the wires are connected well in the box but the toggle boot is ripped so somethin probably go in there. When i tap on the probe and wire nothin happens only when i tap the switch box, Is there a replacement switch I can get from radio shack? anyone ever have this issue?

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[Monty]

Much easier just to contact Sunray. Monty