treblehunter
Gold Member
- Jun 18, 2013
- 9,675
- 11,295
- Detector(s) used
-
Minelab Excalibur II
XP Deus
Garrett pro pointer
XP Deus MI-6 pinpointer
- Primary Interest:
- All Treasure Hunting
I wanted to hit a woods spot down by the river before six day firearm which starts Monday here in New Jersey. Things get a little crowded in the woods and sometimes buckshot is flying around. I didn't find a lot of targets down here, scenery is nice, I did find that cool police whistle (works good) After getting cut up and bleeding from the briers I decided to go hit the cornfield I found that 1783 half Real in. I got in an end that is very riddled with iron. I dug much trash because I have to dig all iffy signals near all that iron. I did come up with this cool button, the back-mark says, Scoville MFG Co Waterbury
It measures approximately 16mm I cleaned it in distilled water with a short soak and a toothbrush, I bent the shank back up (just a C hair, as they say in the construction business) so I could brush it a little better. I'm including a couple pix Scrappy sent me to help identify my crushed two piece.
Enjoy the pix
HH & GL
Brad
It measures approximately 16mm I cleaned it in distilled water with a short soak and a toothbrush, I bent the shank back up (just a C hair, as they say in the construction business) so I could brush it a little better. I'm including a couple pix Scrappy sent me to help identify my crushed two piece.
Enjoy the pix
HH & GL
Brad
Upvote
15