White's MXT Screen Problem

[Calfunyan]

Hi all,
Having trouble on start-up with my MXT.
The screen only displays the 16 boxes across the top and stays that way.
When i test the rig with coins it seems to be detecting correctly, just doesn't tell me what's been found.
Anyone else have this problem and or solution?
Thanks!

 

Amazon Forum Fav 👍

Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector for Experts with Tone ID & Adjustable Sensitivity - Grab it through Amazon!

[KSDirtfisher77]

Hi all,
Having trouble on start-up with my MXT.
The screen only displays the 16 boxes across the top and stays that way.
When i test the rig with coins it seems to be detecting correctly, just doesn't tell me what's been found.
Anyone else have this problem and or solution?
Thanks!
View attachment 2042459View attachment 2042460

Do you have a manual, if so does it mention anything about a factory reset or possibly a master reset. I run whites machines but not familiar with the mxt.

 

[vpnavy]

Hi all...

I noticed this was your very first post - so, Welcome Aboard Calfunyan!

Hi all,
Having trouble on start-up with my MXT. The screen only displays the 16 boxes across the top...

I moved ya from HELP! over to BRANDS › WHITE'S for more exposure...

NOTE: FORUM HELP! USEAGE: This section contains guides tutorials on how to use the new TreasureNet.com software.

 

[Carl-NC]

Most likely a bad connection. There is a ribbon cable from the control box to the pod and at each end it plugs into a connector on the PCB. Sometimes those connections get spotty, often just wiggling the connector will fix it.