Anchor Help

Claude allain

Newbie
Jun 17, 2015
1
4
Primary Interest:
All Treasure Hunting
Hi all
Who could help me to at least try to get country of origin? This has been found in New Brunswick
Canada image.jpg image.jpg
 

Attachments

  • image.jpg
    image.jpg
    940.8 KB · Views: 115
  • image.jpg
    image.jpg
    1.6 MB · Views: 121
  • image.jpg
    image.jpg
    2.4 MB · Views: 119
  • image.jpg
    image.jpg
    1.3 MB · Views: 109
Upvote 4

46Wheat

Silver Member
May 23, 2014
3,648
3,357
Upstate NY
🥇 Banner finds
1
Detector(s) used
Minelab Etrac / Equinox 800 / 8.5x11 DD and 5x8 DD coil /
Garrett ProPointer / Lesche Digger
Primary Interest:
All Treasure Hunting
Holy crap .....now that's an anchor
 

sutphin

Gold Member
Oct 2, 2013
8,344
4,466
brunswick md
Detector(s) used
WHITES 5900, MXT 300, MXT PRO, MXT ALL PRO/ 8X6 SEF COIL
Primary Interest:
Relic Hunting
Talk about dropping the anchor, damn.................................vanzutphen
 

Argentium

Gold Member
Feb 2, 2008
9,058
5,574
Santa Fe, New Mexico
Detector(s) used
Whites, MXT.
Primary Interest:
All Treasure Hunting
I'll guess one of the Maritime provinces of Canada - A total guess based on O expertise concerning anchors .
 

The Patriot

Bronze Member
Oct 16, 2009
2,478
1,964
Digging Relics
🥇 Banner finds
2
🏆 Honorable Mentions:
1
Detector(s) used
Minelab Equinox and CTX 3030
Primary Interest:
All Treasure Hunting

Scrappy

Gold Member
Mar 6, 2014
9,204
14,019
17th century
🥇 Banner finds
7
Detector(s) used
Minelab CTX 3030 & XP Deus
Primary Interest:
Other
Ah, a subject I know a bit about. I'm a Chief Mate on a ship (oil tanker) so nautical history naturally interests me. The anchor there is the old style, which was unchanged for centuries until the 1810's or so.

The anchor there has curved "flukes" which wasn't done until around 1815-1820. Before that they were straight. Now, most "stocks" that make the "T" were made of wood until the 1850's, generally. I would say it's from the latter part of the 1800's onward.

The chain is stud-link type, which as a side note is about 50% stronger than oval links. It looks hand-made which was done right up to the earlier part of the 1900's. That doesn't mean the anchor is the same age as the chain, but it probably is since they often got replaced together back then. The shackle is of the early 20th century variety so my guess overall is it's about turn-of-the-century, give or take 20 yrs. Also, they were last used on sailing ships which died off in the early 1900's as well.

The Brits started shying away from that anchor design in the 1850's so my tendency is to think it's either American or Canadian.

Steve
 

Top Member Reactions

Users who are viewing this thread

Top