tabman
Bronze Member
- Joined
- Jul 5, 2011
- Messages
- 2,306
- Reaction score
- 7,243
- Golden Thread
- 2
- Location
- Germantown, Tennessee
- 🥇 Banner finds
- 2
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- Presently: CTX 3030, Tesoro Modded Cibola, F75LTD-2, XP Deus, Tesoro Mojave, MXT Pro, Tesoro Eldorado, Whites MXT All Pro, Minelab Equinox, Fisher CZ5 & CZ3D
- Primary Interest:
- Metal Detecting
- #1
Thread Owner
I've been saying for a longtime that super tuning is not the best way to get the most depth with the Vaquero. My settings for the discriminate mode: a slight hum for the threshold, discrimination set just high enough to either discriminate out a nail or foil depending on the site that I'm detecting. All the sensitivity that I can get without getting any chatter. Ground balance and then turn to the negative about 1/4 turn depending on the soil type. You want the detector to run smooth so you can hear the faint audio signals. A good set of headphones is a must! I use Killer B Wasp Headphones that has a audio limiter switch.
Scannerguy1968 did a great video showing how to get extreme depth with a Tesoro Vaquero.
tabman
Scannerguy1968 did a great video showing how to get extreme depth with a Tesoro Vaquero.
tabman