Valley Ranger
Silver Member
- Joined
- Mar 24, 2011
- Messages
- 2,516
- Reaction score
- 1,369
- Golden Thread
- 0
- Location
- Shenandoah Valley
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- Minelab Equinox 800, Garrett AT Pro (2), Makro Racer 2, Garrett AT Pinpointer (2)
- Primary Interest:
- Relic Hunting
- #1
Thread Owner
I continue to be impressed with this machine. Once again, I took this unit out to an area on a site that I've hunted hard. It is another challenging site to hunt - lots of iron and lots of modern trash. It's a home site build around 1900 by another Confederate veteran. There was another home on the same site that pre-dated this one.
On this trip the Relic was able to sniff out a number of interesting relics: a 19th century cuff flat button, some decorative brass pieces, a 1940 nickel and the 1801 Large Cent shown here. This is my 2nd 1801 Large Cent recovered. I was using the 5" coil, DI2, all masking settings at zero, sensitivity at 80 and factory on everything else.
On this trip the Relic was able to sniff out a number of interesting relics: a 19th century cuff flat button, some decorative brass pieces, a 1940 nickel and the 1801 Large Cent shown here. This is my 2nd 1801 Large Cent recovered. I was using the 5" coil, DI2, all masking settings at zero, sensitivity at 80 and factory on everything else.
