What's new

A couple of days in the workshop, gold and silver

gunsil

Silver Member
Joined
Dec 27, 2012
Messages
3,881
Reaction score
6,210
Golden Thread
0
Location
lower hudson valley, N.Y.
Detector(s) used
safari, ATPro, infinium, old Garrett BFO, Excal, Nox 800
Primary Interest:
All Treasure Hunting
DSCN2198.webpDSCN2199.webpDSCN2200.webp
Not sure if this is the right place to post these, but I did cut the gem silica and the snowflake obsidian.
Made this with a little gem silica (silicified chrysocolla), used a lot of gold, setting is 7.2 grams 14K, all parts handmade.

DSCN2201.webpDSCN2202.webpDSCN2203.webpDSCN2204.webpDSCN2205.webpDSCN2206.webp

A reddish jasper, snowflake obsidian, and a crazy one with three carnelians. I guess I do get carried away sometimes as with the carnelian ring. I didn't cut the jasper or the carnelians. All parts, bezels, backings and ring shanks made by hand from sheet and wire. These three are sterling. It was a fun few days making these, every step went nicely and I didn't have any solder overruns or other failures. Possibly future finds for the metal detecting folks!!
 
Beautiful work. Personally, I collect gemstones. I wanted to get into silver and goldsmithing but my wife nixed that---said I had too many hobbies already. I tried to convince her it naturally was part of gemstone collecting but she wasn't having any of that!
 
Upvote 0
Looks like fine work there :occasion14: Thanks for sharing the results here :coffee2:
 
Upvote 0
Upvote 0
You certainly do some beautiful work-- really. The future wearers of those are lucky, lucky people!
Thanks for showing us your fine craftsmanship and art.
 
Upvote 0
Exceptional work there! Very impressive. -Luke
 
Upvote 0
I thank you all for your compliments. They are all headed to market, I do have to sell such things to get the buckos to get materials to make more. I don't make that many rings any more for stores or galleries because they only fit a few customers compared to necklaces which often fit many. I tend to like thick bands and they are basically impossible to re-size so I prefer to make rings to order since I can make them to a person's exact size.

Rasputin, you just have to make her a couple of pieces of custom made just for her jewelry and she probably will repent. A lot of my finest pieces have been made for girlfriends, nothing like a pretty woman for inspiration and a who cares attitude when it comes to how many hours go into a unique piece.
 
Upvote 0
Nice work thanks for sharing.
 
Upvote 0

Users who are viewing this thread

Back
Top Bottom