a what it is brass piece??

[blugotti1]

a what it is brass piece?? Maybe a knife blade guard??

found this piece in the 1700's area I've been hunting. It has a threaded hole and around 4 or 5 small notches on one side that look like they were intentionally done. Any ideas guys? thanks for any info!!

Maybe a knife blade guard

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[Wildcat1750]

I have no clue...Hopefully somebody out there will. Good Luck.

 

[creskol]

Can you post a photo of the side view when you get a chance? Thanks.

 

[Anduril]

For some reason (and not necessarily a good one, BTW), my first thought is this part belongs to a 10-speed bicycle. ?

 

[invent4hir]

With the rectangular notch it looks like part of a latch. What kind of metal is it?

 

[Doubter in MD]

Can you post a photo of the side view when you get a chance? Thanks.

I think we're seeing both sides. Unless you mean the edge.

 

[blugotti1]

yeah, that's pics of both sides and its brass..

 

[blugotti1]

better pics

it's about a inch long by about a half inch to. but you can see the almost filed looking notches on the edge on one side.

 

[blugotti1]

I believe this is just half of a piece that is broken in half.. I believe the other side would match the side I found..

 

[ARC]

Part of a "friction arm adjuster".

Similar to this...

 

[blugotti1]

Part of a "friction arm adjuster".

Similar to this...

View attachment 1760391

well AARC, everything I've been digging almost has been around 1700's to 1800. And it's in the middle of the woods with no town within 15-20 miles. And it's size has almost got me thinking a "knife blade guard." These are some sketches I came up with after realizing it was broke in half. So all in all, it measures around 2 1/4" long x 5/8th's wide..

 

[nsdq]

Tigger plate for a gun

 

[blugotti1]

thanks fellas!!

 

[ARC]

well AARC, everything I've been digging almost has been around 1700's to 1800. And it's in the middle of the woods with no town within 15-20 miles. And it's size has almost got me thinking a "knife blade guard." These are some sketches I came up with after realizing it was broke in half. So all in all, it measures around 2 1/4" long x 5/8th's wide..

I wonder...

How is it you came up with the piece in question being broken exactly in half in your opinion ?

 

[DCMatt]

Trigger plate for a gun

Agree.

 

[Anduril]

I'll withdraw my earlier comment about it being part of a 10-speed bike!

(You guys are good..!!)

 

[blugotti1]

I wonder...

How is it you came up with the piece in question being broken exactly in half in your opinion ?

after looking at the edges of the 2 "legs" I could see under a microscope how jagged they were. not flat and rounded like a finished piece would be.

 

[Deftone]

Wow! Such an artist!