Anyone have a listing for this token?

cudamark

San Diego Ring Finder
🥇 Charter Member
Top Banner Poster
Joined
Mar 16, 2011
Messages
14,032
Reaction score
16,850
Golden Thread
1
Location
San Diego
🥇 Banner finds
1
🏆 Honorable Mentions:
3
Detector(s) used
Equinox 800/900, Fisher Impulse AQ, E-Trac, 2 Excal 1000's, White's TM808, VibraProbe, 15" NEL Attack, Mi6, Steath 920ix and 720i scoops, TRX, etc....
Primary Interest:
All Treasure Hunting

Attachments

  • 100_1317.webp
    100_1317.webp
    385.8 KB · Views: 86
  • 100_1318.webp
    100_1318.webp
    409.6 KB · Views: 103
Kappen's CA Tokens book has the 5¢ denomination of this listed, but not this one. His woefully outdated pricing guide shows the 5¢ valued at $4.50. I'd encourage you to post yours on tokencatalog.com
John in the Great 208
 

Upvote 0
Kappen's CA Tokens book has the 5¢ denomination of this listed, but not this one. His woefully outdated pricing guide shows the 5¢ valued at $4.50. I'd encourage you to post yours on tokencatalog.com
John in the Great 208
I agree! THis is a very high denomination for a token. The higher the amount the more rare they are.
Cheers
 

Upvote 0
I agree! THis is a very high denomination for a token. The higher the amount the more rare they are.
Cheers
Thanks, here's some better photos. It measure 27mm at it's widest point. I just noticed that it was made by the L.A. Rub.Stamp Co.....at least that's what it says at the very bottom of the obverse.
 

Attachments

  • 100_1319.webp
    100_1319.webp
    802.1 KB · Views: 73
  • 100_1321.webp
    100_1321.webp
    712.3 KB · Views: 82
Upvote 0
I did post it on tokencatalog.com too.
 

Upvote 0
Cudamark - can you measure it across the widest point of the scallops? In mm if you can. I'll go in and edit the posting when you do.

Oops, I just saw you said it is 27mm. Thanks. It is edited into the format that tokencatalog likes. Thanks!

John
 

Last edited:
Upvote 0
San Diego (San Diego County)
[TABLE="align: left"]
[TR]
[TD]

Unlisted

[TD="width: 100"] [TABLE="align: left"]
[TR]
[/TD]
[/TR]
[TR]
[TD] [TABLE="width: 100"]
[TR]
[TD] [TABLE="width: 100"]
[TR]
[TD]B[/TD]
[TD]S8[/TD]
[TD]27[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[TR]
[TD]
[/TD]
[/TR]
[TR]
[TD] [CA1] [/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[/TD]
[TD]
HEILMAN & ATKIN / CIGARS / TOBACCO / 941 / FIFTH ST. / SAN DIEGO, CAL. / L.A. RUB. STAMP CO.
GOOD FOR / 25¢ / IN TRADE
TC-425511

[/TD]
[/TR]
[TR]
[TD="colspan: 2"]Contributed by: cudamark[/TD]
[/TR]
[/TABLE]
 

Upvote 0
Cudamark - can you measure it across the widest point of the scallops? In mm if you can. I'll go in and edit the posting when you do.

Oops, I just saw you said it is 27mm. Thanks. It is edited into the format that tokencatalog likes. Thanks!

John
Yeah, their contribution page is a bit strange. I filled out all the boxes that I could, then added the photos, and then after the photos were uploaded, all the info I put in the boxes went blank again! I figured they must want one or the other, so, I said the heck with refilling all those boxes again and just hit submit.
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom