AT Pro Aim Point?

[Dawgs241]

What is the aim point for the AT Pro? I remember reading that it is the first square in front of the shaft, however I recently saw videos about people saying it's the front tip of the coil near the Garrett Symbol. Is the aim point different on the 5 X 8 coil than the 8 X 11?

Thanks all.

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[redcobra8u]

It's the first square. You can play with the pin point and verify.

 

[RobRieman]

If you use the pinpoint feature it's the first square. If you use the "wiggle" method it's the front edge of the coil.
Your aim point is that big silver dollar [emoji4]

 

[A2coins]

Put a coin under it and you can see

 

[flgliderpilot]

I prefer niether, too slow. i sweep back and forth note target center, draw a line with edge of coil if it helps, step 90 degrees to line and sweep again...draw another line (real or imaginary) X marks the spot.

I only use poinpoint to determine size. An aluminum can will sound lile a gold ring but they sound very different in pinpoint... one sounds huge the other small.

Imagine the DD coil as a knife blade.. there is no center point only an edge.