What's new

chisel

sscindercoop

Silver Member
Joined
Apr 14, 2009
Messages
2,603
Reaction score
806
Golden Thread
2
Location
Central New York
🥇 Banner finds
2
Detector(s) used
XP Deus
Primary Interest:
All Treasure Hunting
Any idea on the age of the chisel? Thanks coop
 

Attachments

  • 012.webp
    012.webp
    33.5 KB · Views: 404
  • 013.webp
    013.webp
    18.3 KB · Views: 389
  • 014.webp
    014.webp
    27.5 KB · Views: 384
Unfortunately my Kryptonit level is low and I couldn't see through the layers of rust...this is like asking how long a is piece of string...

Now, if you were to remove the rust, maybe it can be identified and age dated...
 
Upvote 0
I bet that steamed up the headphones.
If not what might be, a chisel, perhaps it's a locking peg for whatever.

Like stefen said, a better view will help.
Mike
 
Upvote 0
stefen said:
Unfortunately my Kryptonit level is low and I couldn't see through the layers of rust...this is like asking how long a is piece of string...

Now, if you were to remove the rust, maybe it can be identified and age dated...
Ok,You get yourself some more Kryptonite and Ill get her cleaned up and see if we can get a positive Id.
 
Upvote 0
Ssindercoop, I think that if it is a chisel it would be called a cold chisel. And lost early in it's life based on the fact that the blunt end is not peened over. But I think it is a wedge from a feather and wedge set.
Wedges (Plugs) and Feathers

Wedges and feathers are tools designed to split rock when driven into a drilled hole or natural crack. The wedge fits in the hole between two feathers whose flat sides form a guide that prevents the wedge from jamming as it is driven into the hole. Use wedge and feathers as follows: Position the feathers in the hole so the flat sides of the wedge will be parallel to the line along which the break will occur. Drive the wedge into the slot between the feathers until the rock cracks, or until it sticks in the rock. Then tap the wedge lightly back and forth along the inside edges of the feathers until it is freed. Remove the wedge and, if necessary, begin again. Proceed slowly to allow the tools time to do their work.
To date this object I.M.O would be next to impossible as they have been used for ever. I hope this helps. :icon_thumright:
Broken Knee
 

Attachments

  • fig15.webp
    fig15.webp
    9.9 KB · Views: 209
  • wedges.webp
    wedges.webp
    5.5 KB · Views: 256
Upvote 0
It reminds me of a blunt (flat-end spike) from a very old spike tooth harrow
 
Upvote 0
creskol said:
It reminds me of a blunt (flat-end spike) from a very old spike tooth harrow
It very well could be that who knows. :icon_thumright:
BK
 
Upvote 0
stefen said:
And yet, a neighbors dog deposited a potential chisel specimen on my lawn ::)
Lets see a pic so we can give it a positive Id :laughing7:
 
Upvote 0
I would estimate late 19th to mid 20th century. :icon_thumleft:




*Disclaimer:
Estimate for entertainment purposes only.
 
Upvote 0

Users who are viewing this thread

Latest Discussions

Back
Top Bottom