Ground Inspector
Sr. Member
- Joined
- Feb 17, 2012
- Messages
- 499
- Reaction score
- 221
- Golden Thread
- 0
- Detector(s) used
- Minelab SE Pro
18" Excelerator Coil
Minelab CTX 3030
06 Smart Coil
17 Smart Coil
Garret Propointer
- Primary Interest:
- Relic Hunting
I have a couple questions regarding the 6" and 13x17" coils.
For a normal sized-coin target (dime-quarter), how much depth does the 6" coil lose in manual +3 sensitivity?
How much depth does the 17" coil gain?
Any input is greatly appreciated.
I currently have the 18" coil for an se pro.
I'm thinking about getting one or both of the coils mentioned above.
I tend to hunt at parks, churches, and courthouses. The coins are at natural grass-decay depth (6-10" for a pre 1910 coin). Some areas have high trash from torn down buildings on the same site. Some are fairly clean.
Thanks.
For a normal sized-coin target (dime-quarter), how much depth does the 6" coil lose in manual +3 sensitivity?
How much depth does the 17" coil gain?
Any input is greatly appreciated.
I currently have the 18" coil for an se pro.
I'm thinking about getting one or both of the coils mentioned above.
I tend to hunt at parks, churches, and courthouses. The coins are at natural grass-decay depth (6-10" for a pre 1910 coin). Some areas have high trash from torn down buildings on the same site. Some are fairly clean.
Thanks.
Upvote
0
