Hi to all I am looking to update my detector. I have an AT pro.. But my real question, the difference between the two.Iam getting more to detect a couple of times in and around Ocean. Most of my detecting is on river and beaches and parks. Thank you all.
A few pro's and cons and equivalents:
1) the 3030 and Etrac are the same on depth, for coin-sized targets, when using the stock 11" coil. However, the Etrac tends to hit a point of diminishing returns on coin depth, when going to larger coils (WOT for instance), whereas the CTX does get a tad more depth on coins when going to a larger coil (their 17 x 13" coil). But ... of course. ... there's very few places (beach?) where you'd be able to use such a large monster (very fishy/warbly).
2) The 3030 does not allow the inline sunray probe, whereas the Etrac does allow it. This is a major factor in many guy's un-willingness to update to the CTX from their Exp. II, Etrac, SE, etc...
3) The 3030 is much more complicated to learn (IMHO)
4) The 3030 is waterproof. But that's only relevant if you plan to dunk the box. Versus If you're just doing
occasional casual inter-tidal zone wet beach detecting, you don't need waterproof. And if you *were* worried you get slapped by a wave, or are hunting in beach storm erosion rain, you can just wrap the Etrac with plastic and black -tape. But ... sure, ... if you planned to do a LOT in the ebbing surf and crashing waves, then it's always nice to have water proof, to remove all doubt
I personally never went to the CTX generation. Strictly because it fails to allow for an in-line probe. And since the depth was the same (assuming 11" coil), I didn't see the need for it.
