Dowsing Experiment...

angel_09

Sr. Member
Joined
Jul 8, 2005
Messages
365
Reaction score
4
Golden Thread
0
The true purpose of dowsing is to be useful to mankind to produce tangible results and the likes. Since it is still debatable how it works and why it works, we should look through its results,not how it reacts. Any dowsing tools will react 1001 ways and can be interpreted by anybody the way they wanted it, but the main point here is, does it give results? We can quote other people's works and experiment but still our mind is leaned to believed what we are quoting without due investigation. The best way to support the usability of a dowsing tool is for us to give our own full account of our experiment; and what results we achieved. There is no need to show how much we get; just saying " I found this thing by using this dowsing tool" is more than enough.
In reality, mental dowsing and physical dowsing are terms use by people in justifying what type of tools they are using, how they use it, how it reacts and how it is constructed.
I do believe in dowsing, and it works not by metaphysical and mind over matter but purely scientific.
I have had conducted experiment which I want to share here:
1. Put 10 grams of mercury in a glass vial and seal it.
2. Put a two feet length of cord or nylon as a handle. (Make sure it is properly sealed and no trace of mercury outside.
3. Stand straight and hold the end of the cord and let the mercury rest to its weight.
4. Observe the reaction while holding it.
5. Now, let someone put a gold ring or gold (at least 18 karats and above) underneath the vial with 1 to 2 inches distance.
6. Again, observe the reaction of the vialed mercury.
7. Now move the gold underneath at least 2 inches away.
8. Again, observe the reaction of the vialled mercury.
From this simple experiment, you can deduce your own idea and data. WARNING!!! Do not let your gold or ring touch bare mercury...
This is the very first experiment that I have done that convinces me that dowsing works scientifically. My other experiments are a bit complex.
If anybody has tried this simple experiment, kindly post your observation here.

Angel
 

If you will tie it to the beam, what will provide power for amplification to the elements? If this will be tied to the beam, and the beam is grounded with different materials, what will happen? As I understand it, this is what we called illogical logic. As what have stated before, human body emits electrical energy continously as long as he is breathing. If this will be tied to a beam, and this vial moved, then this will not be dowsing. It will be called magic... Analogous in saying... Do not touch the electronic detector, let it work by itself without touching, if it did not gives off any sound then it is fake...This thing can not really be explained. As I have stated before, THE RESULTS COUNT. Why not give it a try? It will not cost you a dollar...


Angel
 

Not because cord or plastics are not metal, they can not be considered conductors. For conventional electrical principles, it is applicable,( but still they have free electrons to pass forbidden band and stay at conduction band to conduct electrical movement) but for static energy, plastics, paper and other non conducting materials hold electrical and magnetic charge. If some people are not yet aware how much force our body generates, our body generates thousands of volts of very low, low current. it is the enemy of the I.C. Manufacturers. If you will notice, person who works or handles I.C. uses a grounding clamp to discharge current and voltage generated by the human body. It is a common known facts.
Another experiment to "see" how much energy a human body discharge:
Conditions:
Humidity must be less or zero. Room must be dark.
1. use synthetic wool blanket wrapping your whole body.
2. Move your fingers along the length of the wool blanket.
3. You will see the discharge of energy from your finger tips to the wool.
4. If you have stored enough energy in your body, a spark will flow from your finger tip to grounded metal.
(some people develops higher charge than other)
With these, a summation can be develop that dowsing rod is an instrument that needs energy from the body to function, just like a detector that needs battery to function.
In late 60's, a have seen a transistor radio powered by sunlight... no standard batteries. Nothing magic to those who search and understand...It is how we understand, use, convert and apply energy to perform a specific task.
We have so much theories and inventions today that if we will bring it 40 years back it will be a B.S. idea....because they do not know how it works...Ex. sound or voice activated switch, photo cells, infrared switch etc... Why not scientific dowsing?

Angel
 

Mr. Dell Winders,
Now you have opened the real vault of knowledge and information. This is what we need... a true information supported by evidence thru experimentation and with results.

Angel
 

everyone has seen the big light bulbs that look as if they have lightning bolts shooting through them. if the human body is not a conductor of sorts then why does all the electricity in the bulb rush to your fingers when you touch the bulb ? another thing i have found that kind of proves the conductor or receptor theory is that you can take a spark plug, put your finger at a point 3-4 times the distance of the actual spark plug gap away from the end. when you energize the plug, the electricity will arc out around the metal it should hit, to strike your finger, even though it is at a much further distance than the metal tang ......could it be that the human body, being such a good receptor to electricity, is also a good receptor of the emanations or waves put off by other objects or forces ? or is it that i just did the spark plug experiment too many times ? ??? ................................gldhntr
 

Mr. Karl Miller,
1. Does static electricity a pseudoscience?
2. Does the electrical energy emitted by our body a theory of psudoscience?
3. Do electrons circling the neutron in an atom which is part of our body is also a theory of pseudoscience?
4. Does the grounding clamp use by the I.C. manufacturers are also a pigment of pseudoscience?
5. Have you not experience sometimes an electrical discharge to a metal?
6. Does the attraction of paper to plastic is a pigment of pseudoscience?
7. Do the covalent bond, forbidden band and conduction band in elementary electron theory is also a pseudoscience?
Some of these things I have learned from my elementary class long long time ago....

"things we do not know, is not a proof that it is not true."

Angel
 

blackmiller understands the 7th grade material well i hear.....................gldhntr
 

Mr. SWR,
If you used your thermostat for your experiment, and some portion of your mercury was with your coin, definitely your thermostat is already damaged. Temperature sensor must be sealed to function, either you use mercury or or other type of spirit. Principle involved is that Temperature difference makes this fluid to move and create force to activate a micro switch to opern and close the circuit of your compressor motor.
The vial of mercury must be free to move and should be held on the other end by a cord. For analogy: The voice coil of speaker is suspended in between two pieces of magnetized metal and held by the cone, where the cone is held by the speaker housing. This arrangement gives free movement of the voice coil once current is introduce to it, thus giving clear ,nice sound (good results). If you will restrict this movement, what you will have is a squeeky sound or non at all.
It is like forcing the horse to run while the feet are tied.

Angel
 

Mr. Miller,
I do not expect that you will "coin" the actual colors to the "metaphor" word "pigment".
It is true that nobody can not please everybody... :) or we are running in different frequency?
Medium wave against frequency modulated frequency?

Angel
 

Mr. SWR,
I got mine from damaged sphygmomanometer. The one use by the nurses to get blood pressure.

Angel
 

Gentlemen,
By the way, the experiment that I have posted is one of the very basic and fundamental of dowsing. I have used the result in devising a dowsing tool which is incorporated into electronics instrument, in which is not allowed to be posted here. I may have a good imagination, but I do not accept things as they were unless I have proven it to my self. And as I have stated before, It is the results, but if the instrument that we use is very much explained how it functions, the better.

Angel
 

Mr. SWR,
What Mr. Miller has said is correct, if you will boil the mercury and inhale it. Do not do that. And also check your local hospital, those who are using sphygmomanometer, the old type, because is has a big volume of mercury. Check how many doctor and nurses, including patient who are subjected to blood pressure testing, because they are using sphygmomanometer with big volume of mercury. Also do not use thermometer, it also have mercury inside, do not break it and inhale it.
I remember when electricity is in dispute during the time of Thomas Alva Edison and Nicolai Tesla, Edison uphold the D.C. current while Tesla the use of A.C. Edison has done a lot of experiment against A.C. power and develop electric chair just to prove that A. C. is very dangerous. means you can not handle A.C. current the way you can handle D. C. current. it seems during their argumentation that Edison has a point against safety, but in the long run, when Tesla's generator run in Niagara falls to produce power, it opens the door to new wave of thinking.
My point in relating this story is: everything is dangerous unless a person practice all the necessary safety and precautions, he will really put himself into danger.

In my posting about my experiment, have I not said it must be sealed?
If anybody is unsure, do not try it.
By the way, since your AC unit is using mercury for cut-out switch, make sure there is no leak from the mercury bulb, if not all the mercury will go and flow with the air, and as what Mr. Miller said, you will not know what is the cause of your death.

Angel
 

I'm with you angel 09.....I do a lot of experments and they are all to prove to myself that dowsing works. Your right about the mercury. If you heat it the fumes are harmful. When mixed with nitric acid they are deadly. I use mercury to recover the gold from those " empty holes " everyone complains about. When burning it off the gold I am sure that no one is close to the fume. Art
 

SWR said:
...where could one purchase a vial of mercury to use in this experiment?

Years ago, Radio Shack sold mercury tilt switches. They seem to be pretty hard to find now... try HVAC repair, see if they have any dead thermostats.

So, I took one of my tilt switches, added 2+feet of string. Tried a 2-1/2 dollar gold coin 1 inch below the mercury. Nothing happened. Moved the coin over 3 inches. Nothing happened. Repeated the experiment with a 1-ounce gold bar. Nothing. Repeated again with a 10-ounce gold bar. Nothing.

Since Angel did not say that anything is s'pozed to happen, then I reckon it's possible that my results were exactly in line with his. Don't know. However, my results strongly suggest that there is no RealPhysics force occurring between the mercury and the gold.

- Carl
 

Prior to my posted experiment, I have done a more expensive experiment involving mercury and gold.
If you want to mix one metal to other metal, which we commonly called alloying, we heat and melt these two (or three) different metal and produce an alloy. We are subjecting these metals on their melting point for them to mix. Their atoms interact to one another and covalent bonded themselves as one. My question in my mind is, will another type of metal blend to other metal without the application of heat? In room or lower temperature? In the first thought, based on scientific principles, this is not possible.
This is where my experiment comes in: I have a small piece of gold and few grams of mercury, At room temperature, I put my piece of gold on the table, at rest, and put the mercury besides it. At a few MM. the mercury was "zapped" by the gold and my gold becames like a silver color. I tried to remove it but to no avail. (My point here is: against the process of alloying that requires heat to join two metal as one, my gold and mercury joined together as one without the application of heat.) I read the book on how to sepearate the two, and the book says, heat must be applied to separate the two. I've found the answer about this experiment why it was so through researched, but to those who have not done and see this, this is another B.S.
The point in this posting is to "stimulate" one's imagination to create, research and find answers not wriiten in the books. If we will stagnate our mind and close it and cover ourselves with defence mechanism then everything will be at halt.
Remember when one man says that the world is round? He was sentenced to death by the very people who do not believe him.

By the way, do not do this experiment since you will ruin your gold. It will become brittle, and if you want to recover it, you have to remelt it and all other metals and impurities will evaporate, the end result will be pure gold but of lesser volume;
Meaning if you have 10 grams of 18 karats gold, the amount of pure gold you can recover from this will be lower than ten grams. (Calculations can be found in the internet)

Angel
 

My point here is: against the process of alloying that requires heat to join two metal as one, my gold and mercury joined together as one without the application of heat.

I do believe that you can explain this PROCESS since according to you it was made popular in the middle 1800's.

(A process that was made popular in the middle 1800s, during the Gold Rush, and probably it was actually discovered decades before that time.)
 

angel_09 said:
If you want to mix one metal to other metal, which we commonly called alloying, we heat and melt these two (or three) different metal and produce an alloy. We are subjecting these metals on their melting point for them to mix. Their atoms interact to one another and covalent bonded themselves as one.

Alloys usually have metallic bonds, not covalent bonds.

My question in my mind is, will another type of metal blend to other metal without the application of heat? In room or lower temperature? In the first thought, based on scientific principles, this is not possible.

Absolutely... mercury is well-known for this, for at least a few hundred years. Ask any dentist.

This is where my experiment comes in: I have a small piece of gold and few grams of mercury, At room temperature, I put my piece of gold on the table, at rest, and put the mercury besides it. At a few MM. the mercury was "zapped" by the gold and my gold becames like a silver color. I tried to remove it but to no avail. (My point here is: against the process of alloying that requires heat to join two metal as one, my gold and mercury joined together as one without the application of heat.)

Yup, you did the ol' "look, and see fer yourself".

The point in this posting is to "stimulate" one's imagination to create, research and find answers not wriiten in the books.

I suspect this effect is quite easy to find in books.

Remember when one man says that the world is round? He was sentenced to death by the very people who do not believe him.

Don't remember this one...

By the way, do not do this experiment since you will ruin your gold.

You can probably do the same experiment with silver or copper.

Dell Winders said:
"... as opposed to tieing something on a string and let it hang there with the mentality of believing thats all you have to do to duplicate the results of a dumb Kentucky Hillbilly in a matter of minutes."?

Not sure Angel will appreciate being called a "dumb Kentucky Hillbilly" unless, of course, he is a dumb Kentucky Hillbilly.

- Carl
 

I repeated Angel's experiment except, instead of a mercury pendulum with a gold target, I used a magnet pendulum with a steel washer. This time, there was a definite reaction between the magnet and the washer. In fact, I could tie the string to a fixture and, without me touching the string at all, movement of the washer beneath the magnet would effect a movement in the magnet. So, it appears there is a RealPhysics force between the magnet and the steel washer.

I suspect that, if the exact same double-blind protocol were applied to both experiments, it would show that the reaction of the magnet pendulum to the steel washer is real, while the reaction* of the mercury pendulum to the gold is not.

- Carl

* Assuming there was even supposed to be a reaction of the mercury pendulum to the gold, which Angel has still never claimed.
 

Gentlemen,
You have done a correct experiment on a wrong sphere. Magnet and metal washer is the experiment I have done when trying to determine the possibility of over-unity device. You see, magnetic field is always present in a magnet, means a strong force is always there, but idle, like the potential of chemical energy of a gasoline which is also idle unless we use it to produce work. (This is another story)
But the subject is getting of scope. Anyway, what I have done and what I have recorded during my experiment will be always there in my manual. The results, modifications, applications, and most important of all, the gold that was retrieved using this method is the proof. As I have mentioned before, it is only "one" of my experiments. Whenever people will agree or disagree with this results, It is I, myself will have the final say, because the tangible item that I have retrieved is the proof that the end result of my experiment is correct. BTW, the experiment that I have posted is "the very basic" as I have mentioned before, from this point, lots of experimentation and modification has been done.

Angel
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom