baspinall
Bronze Member
- Joined
- Jul 23, 2006
- Messages
- 2,463
- Reaction score
- 844
- Golden Thread
- 1
- Location
- Pennsylvania
- 🥇 Banner finds
- 1
- Detector(s) used
- XP Deus
Minelab Equinox 800
GPX 4500
- Primary Interest:
- All Treasure Hunting
- #1
Thread Owner
Selling my Etrac since I went with the CTX and don't really use it anymore. No warranty left on this machine. Had a new LCD screen installed last year by Minelab. They also went over the unit at the time, no issues were found. Has a arm cuff cover. Standard coil & cover. Both rechargeable and AA battery's & charger. Manual.
Two issues I need to mention. The AA battery case is missing the little door. I use a wrap of black tape around the top two battery's when I use it. Works fine this way. Their cheap if you wanted to grab a back up. The other issue is one of the tabs on the coils that is used to bolt it to the shaft broke off on the top edge. I used J&B weld to epoxy to nylon washers onto the bottom half of the tab. It's strong and has worked with no issues but it is a repair so has to be mentioned. Asking $850.00 or BO.
Two issues I need to mention. The AA battery case is missing the little door. I use a wrap of black tape around the top two battery's when I use it. Works fine this way. Their cheap if you wanted to grab a back up. The other issue is one of the tabs on the coils that is used to bolt it to the shaft broke off on the top edge. I used J&B weld to epoxy to nylon washers onto the bottom half of the tab. It's strong and has worked with no issues but it is a repair so has to be mentioned. Asking $850.00 or BO.
