Eurotek/Eurotek Pro?

[Rebel73153]

How much performance difference is there between them? What are the major differences? I just bought a Standard Eurotek from a forum dealer and should get it before too long. Do any other coils enhance its performance? It comes with the stock 8". Any info appreciated. Thanks

 

Amazon Forum Fav 👍

A Handbook of Civil War Bullets and Cartridges - Grab it through Amazon!

[Chevyfan2k9]

Hi rebel, I have the pro with 8" coil and it has alittle more features then the base model, below is the link to info and they have a 11" dd coil, hope this helps

http://metaldetectorreviews.net/detectors/341-1-eurotekpro.html

Jack

 

[Rebel73153]

Thanks Jack, It appears the only real differences are the Pro has the adjustable volume and pin point? I have heard that the 5" and 4x6" coils for the Fisher F5 will work on them too. Do you know if that's the case?

 

[Chevyfan2k9]

Thanks Jack, It appears the only real differences are the Pro has the adjustable volume and pin point? I have heard that the 5" and 4x6" coils for the Fisher F5 will work on them too. Do you know if that's the case?

Not sure havnt looked into to see if they work, I just traded mine for a fisher 1236x2 with 10" coil, but I know on the pro you can save your settings not sure on the base model

 

[Rebel73153]

Thanks again. Good luck with the Fisher.

 

[Chevyfan2k9]

Thanks again. Good luck with the Fisher.

No problem rebel, the eurotek isn't a bad machine and you should find some good stuff with it I was going to keep mine which I just bought from a member here but couldn't pass up a fisher 1236x2

 

[Rebel73153]

I've heard the Fisher 1236 is a real good machine. Hope it finds lots for you.

 

[elijahhenry10]

I don't know if the base model does, but on the pro you have the capability of turning off iron's audio.

 

[Rebel73153]

Not on the plain Vanilla one.