Ex Cal blue NEL Coil help please

[Joe D]

Hello all a little help please. I need a wiring diagram so i can hard wire this nel attack to my Excalibur blue 1000. Thank you for any help. I can do the job just not sure of the placement of the wires? I have not cut the coil plug yet. Joe

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[tj.cama]

Hello all a little help please. I need a wiring diagram so i can hard wire this nel attack to my Excalibur blue 1000. Thank you for any help. I can do the job just not sure of the placement of the wires? I have not cut the coil plug yet. Joe

bump

 

[DeepseekerADS]

I don't have your answer, but there's people here who do. I do know it needs to be waterproof. Keep searching, there are "connectors" made commercially which can resolve your question. Do a search for "Excal" and you'll find some tips here - I've seen them.

 

[OBN]

If you have not cut the connector your good, just trim back the black cover from the cable and disconnect one wire at a time, pin one on the sovereign connector goes to red, pin 2 black, pin 3 white, pin 4 goes to yellow...But you have to go slow and do one wire at a time or you will have a lot more trouble getting it right.

 

[Sheepdog43338]

The sharpsooter coil I just got, the wires are numbered 1-4 is this the same connections as you stated above OBN?

 

[OBN]

Yes.....