Brivic1
Jr. Member
- Joined
- Feb 20, 2013
- Messages
- 55
- Reaction score
- 66
- Golden Thread
- 0
- Detector(s) used
- A2b groundhog/ whites GM3/ Vsat, and TDI.
13hp 5" jawcrusher, Dryblower, recirc. HB.
F md-20............ Goldbug Pro / 5"and 10" coils
Whites TDI several coils............... My own dowsing tools
..
- Primary Interest:
- Other
G'day from sunny Northern Calif.
I was checking some rocks the other day and the MD-20 started sounding off in a different way, I could not stop the noise at all unless it was switched off.
I played engineer with it for a half hour, changed the batteries,......... same thing. I thought that a potentiometer had busted itself.
It was only 2 years old.
I E-Mailed the Falcon office, adding graphic images.
The next day I got a call from Wally DeSchon, at Falcon. He and I conversed for a bit and going over the settings etc ... the cable connection may have been the culprit, as when I pried the grounding prongs out a bit the machine acted properly again.
The MD-20 will find gold that you can hardly see... . The service that Wally did by that phone call shows that he cares about his customers and was quite thorough , but friendly............ A good bloke to work with, Wally..../// Right there, alongside Whites in Eugene Oregon, Good people...........
Brian Vickery
I was checking some rocks the other day and the MD-20 started sounding off in a different way, I could not stop the noise at all unless it was switched off.
I played engineer with it for a half hour, changed the batteries,......... same thing. I thought that a potentiometer had busted itself.
It was only 2 years old.
I E-Mailed the Falcon office, adding graphic images.
The next day I got a call from Wally DeSchon, at Falcon. He and I conversed for a bit and going over the settings etc ... the cable connection may have been the culprit, as when I pried the grounding prongs out a bit the machine acted properly again.
The MD-20 will find gold that you can hardly see... . The service that Wally did by that phone call shows that he cares about his customers and was quite thorough , but friendly............ A good bloke to work with, Wally..../// Right there, alongside Whites in Eugene Oregon, Good people...........
Brian Vickery
Upvote
0
