Frozen ground???

[Zodiacdiverdave]

Does anyone have any tips, tricks or tools for digging frozen ground. This year we still do not have snow but the ground is like digging concrete.
ZDD

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[SeaninNH]

Detect in the woods. The ground stays soft a lot longer than in parks.

 

[M Scott @ FTP]

On a REALLY good site years ago I had 2 or 3 coffee cans with lots of holes poked in the bottom half of the cans and coat hangers made handles.
I would put charcoal in all of them and start them up. When I had a decent target I would put a can on it and look for another good target and put a can on that-then dig the defrosted targets and just keep rotating them to good targets-it makes for some selective digging but it was a heck of a killer site…….
It did get pretty muddy after awhile.
Mike

 

[Red James Cash]

Get a cordless drill and get your hands on the type saw bit,i forget what theyre called,for cutting holes in doors for door knobs

 

[NGE]

3 inch brick chisel and a 3lb. sledge hammer......NGE

 

[Zodiacdiverdave]

Thanks everyone, some great ideas for gutting through the ice layer.
We just had some snow yesterday but they are calling for more warm weather on Friday. I hope to get out and try out some of these ideas.
Thanks,
ZDD

 

[kayden]

Get a cordless drill and get your hands on the type saw bit,i forget what theyre called,for cutting holes in doors for door knobs

Thats a good idea ...never thought of that!

 

[goldentruth]

Get a cordless drill and get your hands on the type saw bit,i forget what theyre called,for cutting holes in doors for door knobs

Possible: "Core Driller Bit" or "Circular Hole cutter" I call them.
I like the Cordless (German made, Not Mexican Made) Bosh. with a back up battery.
Note: if you had a portable generator from Harbor Freight, a low cost "Heat Gun" works!
It can also warm up your hands & gloves. (Lately, I heat dry my leather boots after the day) (My extra idea).
Good luck.

 

[bearbqd]

I find a geologist pick is the quickest way to go. I just chop with the pointy end around my target and voila.

 

[kieser sousa/rip]

I just got a "raven" from preditor tools...used it the other day in a frozen cornfield and it worked great.....dug a seated dime.....still alot of work though.

On a REALLY good site years ago I had 2 or 3 coffee cans with lots of holes poked in the bottom half of the cans and coat hangers made handles.
I would put charcoal in all of them and start them up. When I had a decent target I would put a can on it and look for another good target and put a can on that-then dig the defrosted targets and just keep rotating them to good targets-it makes for some selective digging but it was a heck of a killer site…….
It did get pretty muddy after awhile.
Mike

Thats a pretty good idea....and you can use it to thaw out your fingers !

 

[G.A.P.metal]

Some time i go out when the ground is frozen.
I take red golf tees pound them in the ground over target and go back in the early spring and dig them then.
Gary

 

[CASPER-2]

when I was younger and could not wait to get out - was known to use a sledge hammer and larger chissel
not fun when warm even less when temps are below freezing and you slip and get your hand

 

[justanotherbarber]

I just waited till spring.

 

[Zachac]

I get my first metal detector today and I am in colorado, figure once I get a target I will then have my wife sit on that spot like a mother hen and I will come back in a few hours and dig...