Liu21
Hero Member
- Joined
- Dec 14, 2014
- Messages
- 829
- Reaction score
- 608
- Golden Thread
- 0
- Location
- Brooklyn, NY
- Detector(s) used
- AT Pro/BH Platinum, (Garret Pro-Pointer)
- Primary Interest:
- Metal Detecting
- #1
Thread Owner
Garrett AT pro low depth and Garrett's customer service.
So some of you may have noticed that i was complaining about getting low depth with my ATP. So I sent it in to Garrett on the 26th of last month. I got it back this morning while I was out hunting with my Platinum, came home and my wife was giving me the word about ordering another detector. Till i explained to her that it was a return from repairs.
anyways here is an airtest before the unit was sent in.

That was with MAX sen, 11x8 DD coil. Lines are a little over an inch...
Now the picture below is a test after service, with only level 7 sens, same coil...

I was getting good tone on the coins much further down the line, but wanted to stay within good VDI as well. So No VDI, plus another 1-2 inches with good tone. Idk why the pictures dont rotate ..
So some of you may have noticed that i was complaining about getting low depth with my ATP. So I sent it in to Garrett on the 26th of last month. I got it back this morning while I was out hunting with my Platinum, came home and my wife was giving me the word about ordering another detector. Till i explained to her that it was a return from repairs.

anyways here is an airtest before the unit was sent in.

That was with MAX sen, 11x8 DD coil. Lines are a little over an inch...
Now the picture below is a test after service, with only level 7 sens, same coil...

I was getting good tone on the coins much further down the line, but wanted to stay within good VDI as well. So No VDI, plus another 1-2 inches with good tone. Idk why the pictures dont rotate ..
Last edited: