Got a blade or maybe a scraper

Older The Better

Silver Member
Joined
Apr 24, 2017
Messages
3,633
Reaction score
7,403
Golden Thread
0
Location
south east kansas
Detector(s) used
Whites Eagle Spectrum
Primary Interest:
All Treasure Hunting
It was too nice to come home from work and sit inside so I went out and checked a spot for morels and shifted to looking for points. I Found this tool halfway down the bluff near a small spring. I’m leaning towards a scraper but they sure put a lot of work into the back end if it is. I could also see an abandoned preform but there seems to be a little attention payed to what would be the scraping edge. It's a Pretty material not super common but it’s around. I don’t think I’ve found a tool made out of it till now.
IMG_8792.webp
IMG_8794.webp
IMG_8795.webp
IMG_8797.webp
IMG_8796.webp
IMG_8800.webp
IMG_8802.webp
IMG_8804.webp
IMG_8805.webp
IMG_8808.webp
 

Upvote 11
Nice. Edges do look worked. A small one, so maybe for use when away from the village?
 

I’m going with Blade or preform. It’s a good find
 

Nice find, really like the material 👌
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom