GatorFrog
Jr. Member
- Joined
- Nov 26, 2011
- Messages
- 44
- Reaction score
- 4
- Golden Thread
- 0
- Location
- SE Florida
- Detector(s) used
- Excal II
- Primary Interest:
- Beach & Shallow Water Hunting
- #1
Thread Owner
I just bought an Excal II and went out last weekend to try it out.
Following some of the tips I found here, my threshold was set just so I would have constant high pitch "buzz", discremination was set a minimum.
I noticed that if i went from wet sand to slightly underwater, the high pitch buzz changed to a lower tone buzz. As a matter of fact, if a wave hit the coil, the buzz pitch would change. I found myself having to make a quick pass over my metal scoop to "reset" the buzz to the normal high buzz...
Is this normal?
Following some of the tips I found here, my threshold was set just so I would have constant high pitch "buzz", discremination was set a minimum.
I noticed that if i went from wet sand to slightly underwater, the high pitch buzz changed to a lower tone buzz. As a matter of fact, if a wave hit the coil, the buzz pitch would change. I found myself having to make a quick pass over my metal scoop to "reset" the buzz to the normal high buzz...
Is this normal?