Help needed on new program

[Truth]

I’m a little late to the party can somebody be kind enough to explain to me how to program the latest program they have a boat. I didn’t do the F2 and I didn’t see one thing different I hope this program will help me out. If anybody out there with has the time to let me know how to do it in layman’s terms I would deeply appreciate it. Have a blessed day

 

Amazon Forum Fav 👍

Agony and Death on a Gold Rush Steamer: The Disastrous Sinking of the Side-Wheeler Yankee Blade - Grab it through Amazon!

[CygnusX1]

Are you talking about the new Equinox 3.0 update? I installed it on my EQ600 and it added the 4kHz so you have 4,5,10,15 20kHz, and if it is an EQ800 you also get the 40kHz. It seems like hunting in the 4kHz goes pretty deep with a great signal. Also, it really settled down any random interference I was getting and I could crank up the sensitivity. I hope this helps you a little.

 

[SultansOfSwing]

I’m a little late to the party can somebody be kind enough to explain to me how to program the latest program they have a boat. I didn’t do the F2 and I didn’t see one thing different I hope this program will help me out. If anybody out there with has the time to let me know how to do it in layman’s terms I would deeply appreciate it. Have a blessed day

Go here

https://www.minelab.com/equinox-software-update-3-0

Then click download for mac or PC.
Once than downloads click Run.
The program will initiate and you will receive instructions on the next step. Which will be to connect the detector to the computer via the charging cord. Click continue and it will scan your detector and show you what version you are running. Then after that click continue to update the detector. After that is complete unplug your detector.

 

[Truth]

Go here

https://www.minelab.com/equinox-software-update-3-0

Then click download for mac or PC.
Once than downloads click Run.
The program will initiate and you will receive instructions on the next step. Which will be to connect the detector to the computer via the charging cord. Click continue and it will scan your detector and show you what version you are running. Then after that click continue to update the detector. After that is complete unplug your detector.

Much appreciated may your kindness bring silver and gold

 

[Truth]

Are you talking about the new Equinox 3.0 update? I installed it on my EQ600 and it added the 4kHz so you have 4,5,10,15 20kHz, and if it is an EQ800 you also get the 40kHz. It seems like hunting in the 4kHz goes pretty deep with a great signal. Also, it really settled down any random interference I was getting and I could crank up the sensitivity. I hope this helps you a little.

I appreciate that tip I got to be honest with you I never hunted outside of multi but I’m going to figure this out I appreciate the suggestion [emoji1317]

 

[Truth]

Go here

https://www.minelab.com/equinox-software-update-3-0

Then click download for mac or PC.
Once than downloads click Run.
The program will initiate and you will receive instructions on the next step. Which will be to connect the detector to the computer via the charging cord. Click continue and it will scan your detector and show you what version you are running. Then after that click continue to update the detector. After that is complete unplug your detector.

Have you noticed any difference? Because the other download that was supposed to help with iron I didn’t notice a thing.

 

[Truth]

Are you talking about the new Equinox 3.0 update? I installed it on my EQ600 and it added the 4kHz so you have 4,5,10,15 20kHz, and if it is an EQ800 you also get the 40kHz. It seems like hunting in the 4kHz goes pretty deep with a great signal. Also, it really settled down any random interference I was getting and I could crank up the sensitivity. I hope this helps you a little.

Wait a minute you live in Covington Louisiana?

 

[Truth]

Go here

https://www.minelab.com/equinox-software-update-3-0

Then click download for mac or PC.
Once than downloads click Run.
The program will initiate and you will receive instructions on the next step. Which will be to connect the detector to the computer via the charging cord. Click continue and it will scan your detector and show you what version you are running. Then after that click continue to update the detector. After that is complete unplug your detector.

Well I’ve been needing a PC and Internet all I have is my phone