Help with Metal tool identification

[Itfoundme13]

It is very heavy and the tip is broken off.

Sent from my iPad using TreasureNet

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[dieselram94]

Nail puller? Perhaps a valve spring tool?

 

[dieselram94]

I am not so sure the tip is broken off...

 

[bigfoot1]

I suspect it is half a handle broken at attachment point

 

[dieselram94]

I suspect it is half a handle broken at attachment point

Could be, but the way it is bent looks like it was used for prying?

 

[bigfoot1]

any wear or indication for nut,bolt or washer wear at end?just curious,still researching tool possibility

 

[Itfoundme13]

Bigfoot1... I do not see any wearing. Attached close upmpics of tip and handle

Sent from my iPad using TreasureNet

 

[dieselram94]

The end looks modified with the half moon being off center.

 

[dieselram94]

Where and how was it found?

 

[Power Guy]

I agree with Bigfoot. I believe I have seen something very close to this in the past on a metal door. The hole was used for bolting onto the door and the handle end was bent out so you could get your hand around the bar without pinching your hand against the door.

 

[bigfoot1]

I cant get past that it is part of a lever,farm implement etc.its shape,thickness indicates this to me.far too many possibilities to know for sure.If found in a field,farm etc.then I would be even more confident.

 

[Itfoundme13]

I found it in the woods fort belvoir, va.

Sent from my iPad using TreasureNet

 

[Itfoundme13]

There are pock marks on the inside of the curved portion.

Sent from my iPad using TreasureNet

 

[mick56]

Is it brass? If it is, not too many tools are made out of brass.

 

[Paleopilot]

Maybe a bent handle from a pair of hedge clippers?

 

[bigfoot1]

operator controll lever..logging tractor etc.

 

[spootyooty]

Looks kinda like a lift control lever off of an old tractor.

 

[Itfoundme13]

Mick56. It reacted to a lead test, so I think there is lead in it. It also has some green on it... oxidation? I used my Dremel to clean off a small portion....and there is a golden metallic color to it

Sent from my iPad using TreasureNet