- Joined
- Dec 3, 2014
- Messages
- 1,693
- Reaction score
- 3,816
- Golden Thread
- 1
- Location
- Central Texas
- 🏆 Honorable Mentions:
- 5
- Detector(s) used
- Equinox 800
Modified Explorer 2
Raptor c-31 digger
31" Lesche Sampson
- Primary Interest:
- All Treasure Hunting
I've been busy the last few weeks getting 2 of our places ready to sell so I can get ready to move from NM to Texas this year. I finally got caught up, closed on one place Friday and will close on the main house next month month :clapping:
Hit a new area at the 1850's fort sight today and managed to find a pouch full of lead. Normally the bullets we find are dropped, today, almost all looked fired. I was about 2000 feet or so from where the fort originally stood, from what I've read about this place, no skirmishes took place near the fort. My buddy and I think it may have been the firing range, but, we have no idea. I was surprised to dig some Confederate bullets mixed in with the other lead, not sure what's going on there, but, I'll take it. After almost 6 hours of digging nothing but lead and aluminum, I quit digging the 10-11 numbers because most turned out to be the small lead balls. I did managed several pewter trouser buttons from a different spot right before I called it a day.
I was running the Nox 800 with these settings:
Park 1
Recovery speed 4
Sens 24
Iron bias 0
2 tones
Tone break set at -9 to +9
Manual GB
Hit a new area at the 1850's fort sight today and managed to find a pouch full of lead. Normally the bullets we find are dropped, today, almost all looked fired. I was about 2000 feet or so from where the fort originally stood, from what I've read about this place, no skirmishes took place near the fort. My buddy and I think it may have been the firing range, but, we have no idea. I was surprised to dig some Confederate bullets mixed in with the other lead, not sure what's going on there, but, I'll take it. After almost 6 hours of digging nothing but lead and aluminum, I quit digging the 10-11 numbers because most turned out to be the small lead balls. I did managed several pewter trouser buttons from a different spot right before I called it a day.
I was running the Nox 800 with these settings:
Park 1
Recovery speed 4
Sens 24
Iron bias 0
2 tones
Tone break set at -9 to +9
Manual GB
Amazon Forum Fav 👍
Attachments
Upvote
10