I NEED A COIL

originalpanama

Jr. Member
Joined
May 1, 2009
Messages
20
Reaction score
5
Golden Thread
0
Have you thought of building one?
 

THANKS
BUT I DONT KONOW HOW TO CONSTRUCT ONE
DO YOU HAVE THE INSTRUCTION TO DO IT?
I WOULD APPRECIATTE IT
THANKS AGAIN
JOSE
 

What is your coil conection like. I have a 10" DD factory coil for a Minelab 4000. ???
 

I SAW THE ENTRANCE, IS A 3 SMALL HOLES CONECTOR
IT APPEAR A SOUND CONECTOR TIPE OF THREE PINS
ONE HOLE UPPER
AN 2 HOLES DOWN
IT HELP TO UNDERSTAND?
THANKS
JOSE
 

it would help to post a picture of what you need
 

What size of a coil are you looking for?


A photo of the connector and detector would be most helpful.


Is this it?
 

Attachments

  • pulsestar.webp
    pulsestar.webp
    40.5 KB · Views: 492
NO, IS NOT THAT
I AM INCLUDING THA SCAN THAT I MAKE NOW,
TOP AND BACK
I HOPE CAN HELP YOU
THANKS
BEST FROM PANAMA
JOSE
 

Attachments

  • pulse1.webp
    pulse1.webp
    27.4 KB · Views: 479
  • pulse2.webp
    pulse2.webp
    41.1 KB · Views: 482
if you can find out what the frequency is of your MD, you may be able to convert an existing coil.
you could pick up a plug at a electronics repair shop
 

HOW I CAN KNOW THE FRECQUENCY OF MY MD?
HOW I CAN DO IT?
WHAT THE METHOD TO DO IT?
THANKS, BUT I AM STILL WITHOUT A PHISICAL COIL
THERE IS NOT IN PANAMA USED COILS...
 

It's a PI unit.

Freq does not come to play.

Matching it to the Ohms and Henrie's Impedance would be the concern.

I'll look around some more.
 

check with Kellyco metal detectors, listed at the top of this page.
they sell pulse star and may be able to help you
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom