is my garrett suppose

[erik12152003]

To beep when I swing it at th stoping point to bring it back. If not how do I fix it. Sorry for the dumb
erik

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[erik12152003]

I have been looking for info on capt kid do you know any it would be a great help Thanks Erik

 

[rsc]

My water machine strums and beeps in the wire is not tight or secured to the shaft (I use velcro). You may wanna wrap that rascle......LOL HH gayle

 

[Rubicon]

My CX is doing the exact same thing. It beeps as the case flexes from one direction to the other. Seems to be worse moving it forward and back versus side to side. It is on it's way back to Garrett. I'll post my results. Couldn't happen at a worse time! It's tectin' time!

 

[erik12152003]

Let me know please I just found a crack in the front so I think it is the same thing the flex Thanks for the help

 

[erik12152003]

I live with in a mile of the cold spring and my house was an old dairy farm I will be checking that out Thanks for the info

 

[Rubicon]

I tracked my package, Garrett should be receiving it today. I'm hoping they will call with the results soon. :P

 

[Rubicon]

Well, my CX is on it's way back to me, I should have it on the 11th. I was told they re-wired the bulkhead connector for the coil and then re-calibrated the unit. Sounds like maybe a wire came loose from the inside side of the coil screw on connection. When I get it back I'll let you know how it works.

 

[Rubicon]

Apparently that was the problem, I'm back in the swing!

 

[erik12152003]

did they charge you anything for fixing it

 

[Rubicon]

No charge.

 

[erik12152003]

cool I will send mine out tomorrow

 

[erik12152003]

sent my md out and now waiting

 

[erik12152003]

got it back in less than a week and cost was 0 tried it out and it works great thanks for the info