Manticore unmasking abilities...

sibbley

Bronze Member
Joined
Mar 18, 2023
Messages
1,096
Reaction score
3,281
Golden Thread
0
Location
Nazareth, PA
Detector(s) used
Dr. Otek MT-XR, Ace Apex, Xterra Pro, Nokta Legend, Nokta Makro Impact, Manticore, XP ORX, XP Deus 2 WS6 Master, XP Deus 2, Deeptech Vista X, Nokta Makro Invenio Pro
Primary Interest:
Metal Detecting
The Manticore is awesome at unmasking. I found an IHP yesterday that I was able to hear through the grunt of what turned out to be two nails. BTW, I'm also on basic factory settings. I still haven't made much of a change at all to the settings. Low and slow and set the sensitivity one notch below where the chatter starts seems to be the key IMHO. Also using the M9 Coil.

My shovel blade is about 4". The IHP was at the bottom of plug, so about 4". The nails were just above maybe 2-2 1/2" deep.

P1002160_WM.webp
 

Snuck this neat ring out between two iron signals with the Manticore today. It was a scratchy 44-45 between the iron grunts.

IMG_20250315_134936321_PORTRAIT.webp
IMG_20250315_181303009.webp
 

The Manticore is awesome at unmasking. I found an IHP yesterday that I was able to hear through the grunt of what turned out to be two nails. BTW, I'm also on basic factory settings. I still haven't made much of a change at all to the settings. Low and slow and set the sensitivity one notch below where the chatter starts seems to be the key IMHO. Also using the M9 Coil.

My shovel blade is about 4". The IHP was at the bottom of plug, so about 4". The nails were just above maybe 2-2 1/2" deep.

View attachment 2196038
Great find in those nails! Congrats! The Minelab Manticore is a HECK of a machine!
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom