minelab x-terra 505

kshollywood

Hero Member
Joined
Jul 15, 2010
Messages
521
Reaction score
170
Golden Thread
0
Location
Brandon,ms
Detector(s) used
XP DEUS WS5 with 11" coil,,,,,,,,,,,,,,,,,,,,,Whites VX3, whites DFX, MINELAB xterra 505
Primary Interest:
Relic Hunting
In ground that is less trashy i would go with a 10.5 dd at 18khz for bullets and regular 10.5 dd for relics . I have heard that the 9 inch 3khz like old silver and copper though. I am getting ready to order a 3khz coil. I have found some good relics with the stock coil. With my 70 running two tones and digging every high tone. My ground usually balances in the 50's that has alot to do with coil choice also. DD coils do better in high mineralized grounds high being low ground balance numbers . Low numbers are higher mineralized. Hope this helps.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom