Barry-Goodknight
Jr. Member
- Joined
- Sep 4, 2012
- Messages
- 68
- Reaction score
- 14
- Golden Thread
- 0
- Location
- Black Hawk
- Primary Interest:
- All Treasure Hunting
MXT VDI number help and ore identification help...
So I went detecting the other day on an old gold mine tailing pile.
I pulled up a 5-10 pound piece of ore of some sort. It reads a very steady 0 on VDI no matter what mode it is put on. Sometimes it will go to a +8, but 9 out of 10 passes, it sits steadily on 0 VDI. On prospecting, it's a solid 10%.
It's very heavy, but lead should be in the 50's, no? Silver is in the very high range. So what could it be? Any ideas?
So I went detecting the other day on an old gold mine tailing pile.
I pulled up a 5-10 pound piece of ore of some sort. It reads a very steady 0 on VDI no matter what mode it is put on. Sometimes it will go to a +8, but 9 out of 10 passes, it sits steadily on 0 VDI. On prospecting, it's a solid 10%.
It's very heavy, but lead should be in the 50's, no? Silver is in the very high range. So what could it be? Any ideas?
Amazon Forum Fav 👍
Last edited:
Upvote
0
