First you need a set of rods
To make the L rods cut two hangers at the neck and straighten them. Make the handles 5" long and the long side 17"making sure that the handles are free of the old bends. Remember that these L Rods are not very sensitive but will react to a lot of different objects.
RECEIVING RODS
The first step is to simply take the receiving rods in your hands. Feel them: look at them: and get used to them. Outside is best for practice but inside will work. Hold the receiving rods in front of you-chest high-about 18" apart at the same height, parallel to each other and to the ground. It is best if one of the rods is one inch above the other so they won't touch each other when they cross.
The most important thing for you to do is practice a lot. Expect the rods to feel clumsy at first; awkward. The wind may blow them around somewhat. Sometimes they will swing outward too far, but don't get discouraged because we all have gone through this experience. If the rods aren't level at all times or they move a bit, don't worry. It is not that critical. After you have some practice and start working with the system, you will be able to take a set of rods in your hands and make them work properly for you in the wind, dodging trees, rocks, or any obstacles you may encounter.
Now if you want to see if you would like to learn just how these tools work I can give you a couple of ways to try....Remember if the rods do not work neither will a field generator..If you have a cell phone, Battery operated calculator or a Walkie takie with Channel 7 which should be 462.7125MHz I can tell you how to see if these tools will work for you..It is just like a free trail...Art
I have had a few messages about this..so I guess I should tell everyone
With the calculator you put in 353 equal and do nothing else...On the cell phone you put in 353 and do nothing else and on the walkie talkie you put in on channel 7 and tape the talk or send button down...Now you put it on the floor...Place some gold about 10 foot away...Now walk between them with the rods...The rods should respond....Art