Mystery Coin

Tony (NC)

Full Member
Joined
Dec 3, 2008
Messages
181
Reaction score
6
Golden Thread
0
Location
Claremont, NC
Hey folks....I found this copper or bronze coin just a few feet away from a 1784 half reale. I don't know anything about coppers, and I know this one is a LONG shot....but I was hoping maybe someone has a theory on what this is. It is the same size as the half reale ~ 17mm. Here's a look at both sides (what's left of it!) Any theories as to what it is/was? Thanks.
 

Attachments

  • Copper1.webp
    Copper1.webp
    49.2 KB · Views: 277
  • Copper2.webp
    Copper2.webp
    45.2 KB · Views: 260
maybe a Connecticut copper based on the platform towards the bottom of the coin, but then the size is wrong. :dontknow:



Try a pencil rubbing of the coin.
 

Upvote 0
17mm is an odd size for a copper. Looks like it may be a thick button. There is a mark right in the middle where the shank would go.
 

Upvote 0
Whatever it was or is there seems to be nothng left but a copper blank. :dontknow:
 

Upvote 0
Thanks Anyway....

I really didn't expect to get a positive ID on this thing. It's too far gone. I was hoping someone knew of a copper that is 17mm.

Neil..I see what you are talking about, but I'm sure it's not a button.

So I guess we actually did get a positive ID.....It's a 17mm copper/bronze slug! Thanks for the input.
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom