Need some help with IDs on an old copper and a token

Wallhangers

Hero Member
Joined
Jul 28, 2008
Messages
897
Reaction score
59
Golden Thread
0
Location
SW Michigan
Detector(s) used
XP Deus, Minelab Explorer SE Pro, T2 SE
Primary Interest:
All Treasure Hunting
Need some help with ID's on an old copper and a token

Both of these are rough but hopefully there is enough that someone could at least give me an era. On the coin, you can just make out the outline of a bust and there are only little traces of lettering, not enough to help me figure it out. The coin is very thin and measures about 27mm. On the token, it looks like it has Kre_zer?, and then I believe it is 185_ (8?). I have only hunted about 3 times this year, also found an 1837 LC, 1860 Fatty IHP, 1892 Barber dime, and a few other IHP's. Too much work and I also took a couple weeks to hunt Brown Bear in Alaska. Now that the crops are in, I will be lucky to get out just a few more times this year. Thanks for any help you can offer.

101_3907.jpg


101_3896.jpg
 
Upvote 0
Re: Need some help with ID's on an old copper and a token

First is a king George III British Halfpenny (Circa. 1770-1775)
 
Re: Need some help with ID's on an old copper and a token

Iron Patch said:
First is a king George III British Halfpenny (Circa. 1770-1775)

And, it is a killer find for SW Michigan!
 
Re: Need some help with ID's on an old copper and a token

2nd... Austrian 1 Kreuzer.
 

Attachments

  • 314_7144314675277dd7M.webp
    314_7144314675277dd7M.webp
    9.3 KB · Views: 373
  • 314_7144147575277dd7M.webp
    314_7144147575277dd7M.webp
    9.9 KB · Views: 374
Re: Need some help with ID's on an old copper and a token

Thanks so much IP!!! I wasn't sure it I could get an id on either of these and you nailed them both. The site where I found the King George is an old site that doesn't give up much and I wasn't even sure it was a coin before I started cleaning it. Thanks again!
 
Re: Need some help with ID's on an old copper and a token

Wallhangers said:
Thanks so much IP!!! I wasn't sure it I could get an id on either of these and you nailed them both. The site where I found the King George is an old site that doesn't give up much and I wasn't even sure it was a coin before I started cleaning it. Thanks again!


Digging Georgies is pretty good for MI. An online friend of mine used to do well hunting along the Detroit river. Lots of both relics are coins.
 
Re: Need some help with ID's on an old copper and a token

Incredible King George III copper from the Michigan frontier! :hello2: :hello2: :hello2: :hello2: It just goes to prove the Colonials are in other states. :wink:

Kirk
 
Re: Need some help with ID's on an old copper and a token

WTG there WH!! :headbang: Nice to see some sweet oldies coming out of MI soil. This gives the rest of us 'ganders hope! :icon_sunny:

HH
 

Users who are viewing this thread

Back
Top Bottom