never again!!

[aa battery]

broke down 25 truck tires by hand for weight today for da rims

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[dumpdigger]

I use a sawzall and cut across the tire and right into the rim on both sides till I get through the bead. Then just peel the tire off the rim.

 

[Emperor Findus Cladius]

I use a sawzall and cut across the tire and right into the rim on both sides till I get through the bead. Then just peel the tire off the rim.

I do basically the same thing except use an angle grinder.

 

[aa battery]

I use a sawzall and cut across the tire and right into the rim on both sides till I get through the bead. Then just peel the tire off the rim.

I use a sawzall and cut across the tire and right into the rim on both sides till I get through the bead. Then just peel the tire off the rim.

I do basically the same thing except use an angle grinder.

you guys are smarter than me 8)

 

[TexasDigger1]

I use a reciprocating saw and cut close to the rim, tire comes right off, by hand would kill me......

 

[aa battery]

I use a reciprocating saw and cut close to the rim, tire comes right off, by hand would kill me......

we do that now

 

[Produce Guy]

So how much money$$$$,did you get?

 

[aa battery]

So how much money$$$$,did you get?

it was combined with other scrap

 

[treeslayer]

I use my log splitter . I put tire down on its side and just crush the rim. It works great on aluminum rims. but it will do most steel car tire rims.

 

[aa battery]

I use my log splitter . I put tire down on its side and just crush the rim. It works great on aluminum rims. but it will do most steel car tire rims.

good advice

 

[ivan salis]

just grab em by hand and rip em off -

 

[aa battery]

just grab em by hand and rip em off -

ivin my life right now is so bad i could do it with 1 hand

 

[ivan salis]

pretend its the bosses neck - easy as that

of course it helps to have 18 in dia forearms

used to stomp on the tire to break the seal (400 lbs size 13 eee foot)- then use a wrecking bar to pry em off -- or the easy way bit of starter fuel (ether) and a match and BLOW EM OFF

 

[aa battery]

pretend its the bosses neck - easy as that

brother you are my doctor

 

[ivan salis]

a bit of starter fuel and a match will BLOW EM OFF --BANG

theres only a very few bothersome problems that can not be solved with the proper use of explosive matter.

 

[aa battery]

a bit of starter fuel and a match will BLOW EM OFF --BANG

theres only a very few bothersome problems that can not be solved with the proper use of explosive matter.

bang!!

 

[cyberdan]

a bit of starter fuel and a match will BLOW EM OFF --BANG

saw the exact opposite on MYTH BUSTERS (seating the rim)

theres only a very few bothersome problems that can not be solved with the proper use of explosive matter.

see that every week on MYTH BUSTERS

 

[boogeyman]

a bit of starter fuel and a match will BLOW EM OFF --BANG

theres only a very few bothersome problems that can not be solved with the proper use of explosive matter.

All problems CAN be solved by the proper application of high explosive! You just gotta use more explosive for some problems than others!

 

[goodie hunter]

I just make my Mother N Law break them down. Saves wear and tear on me.