No Clue!!!

[Troller]

No idea what this item is. Any ideas?

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[ScubaDetector]

Looks like pot metal. Other than that absolutely no clue

 

[Icewing]

Looks like pot metal. Other than that absolutely no clue

That's an insult to both pot and metal, it's recyclable at best, but to the untrained eye it's just trash.
Any more than that is just asking too much of it or anyone who attempts to decipher the mystery.
Of all things you could have asked about, why this one? That is the real question.

Welcome to T-Net

 

[cw0909]

Troller, what size are the indents,maybe part of a vintage Vending Machine see img
and you should read here too
http://www.treasurenet.com/forums/what/136849-please-read-before-posting-items-what.html

img
http://thumbs4.ebaystatic.com/d/l225/m/m1nChm4dv3q36pIy1jzskvg.jpg

 

[Troller]

Their smaller than coins, they look to be about an a quarter of an inch. I was thinking maybe it could possibly be a piece of a saddle or something related to that. It wasn't very deep at all and was found in some sand that had been transported from an unknown location. thanks for the picture and the input! I will post a picture of the piece next to a dime soon!

 

[Troller]

BTW my apologies for not checking out the rules! guess I got ahead of myself on this one! I will be sure follow these guide lines from now on!

 

[Back-of-the-boat]

Looks to be a broken zipper pull although a very large pull.

 

[cw0909]

Their smaller than coins, they look to be about an a quarter of an inch. I was thinking maybe it could possibly be a piece of a saddle or something related to that. It wasn't very deep at all and was found in some sand that had been transported from an unknown location. thanks for the picture and the input! I will post a picture of the piece next to a dime soon!

sorry was not thinking indents was for coin, more for bearing on the slide in
but if your using a dime for size, prob not a mech tray for vending

 

[Tony in SC]

The square cut out makes me think striker plate for a latch ? Tony

 

[Troller]

I actually hadn't thought of bearings! I might go back and see if I can find some more parts!

 

[maxpower]

leaning towards a shim like for a ball joint