muerte33
Sr. Member
- Joined
- Jun 27, 2015
- Messages
- 290
- Reaction score
- 280
- Golden Thread
- 0
- Location
- Southern Mississippi!
- Detector(s) used
- Garrett AT Pro Nel Storm Coil, XP Deus 11" Coil, Minelab Equinox 600, White's TRX, Teknetics TekPoint, XP MI-6 Pinpointers, Lesche shovels
- Primary Interest:
- Metal Detecting
- #1
Thread Owner
Finally "found" time to build one of these.
My advice is to make sure you find the roll of mesh first then fit your specs to the mesh.
I made it using the 1/4" wire mesh like in the NuggetNoggin video, but I thought the 1/2" looked right at Lowes to me (I went with 1/4" though).
The old adage measure twice and cut once was ignored, and I paid for it.
It is good enough for the woods though!


I also received my Killer B Stinger headphone today, so I won't be bothering you guys anymore with my audio.
I just cannot hunt with both ears covered.
These are tight on my head, but should do the trick.
Inside the box was a link to this site where they have live Monday night relic hunting shows at 8:00 P.M. Central.
http://www.relicroundup.blogspot.com/
My advice is to make sure you find the roll of mesh first then fit your specs to the mesh.
I made it using the 1/4" wire mesh like in the NuggetNoggin video, but I thought the 1/2" looked right at Lowes to me (I went with 1/4" though).
The old adage measure twice and cut once was ignored, and I paid for it.
It is good enough for the woods though!


I also received my Killer B Stinger headphone today, so I won't be bothering you guys anymore with my audio.
I just cannot hunt with both ears covered.
These are tight on my head, but should do the trick.
Inside the box was a link to this site where they have live Monday night relic hunting shows at 8:00 P.M. Central.
http://www.relicroundup.blogspot.com/
Amazon Forum Fav 👍
Last edited: