Ben Cartwright SASS
Bronze Member
- Joined
- Aug 7, 2012
- Messages
- 1,636
- Reaction score
- 1,587
- Golden Thread
- 0
- Location
- Massachusetts
- Detector(s) used
- Whites, Garrett
- Primary Interest:
- Other
- #1
Thread Owner
Ridgeway Grandfather won't run
I have a Ridgeway from 1960, it will not run with the pendulum on it, but when I remove it and let the thing it hangs from run it runs fine, chiming and keeping fast time, although very fast. When I do that it sounds out of beat, I checked and every part of the case is level. If I tilt it up to the right about an inch, way out of level it is in beat.
The weights are on the correct chains. When I push the pendulum it ticks to one side and then makes a funny sound as it goes to the other side, and in a couple minutes stops.
I ordered some clock oil and will try that first but wonder what may be wrong. I don't want to spend the $500 to $600 to have it adjusted/fixed.
I figure I would try to fix it myself or buy an entire movement, you can get them around $400 and replace it. But thought I would ask for any thoughts also does anyone know of any decent clock repair people around SE Mass/RI who are not that expensive?
I have a Ridgeway from 1960, it will not run with the pendulum on it, but when I remove it and let the thing it hangs from run it runs fine, chiming and keeping fast time, although very fast. When I do that it sounds out of beat, I checked and every part of the case is level. If I tilt it up to the right about an inch, way out of level it is in beat.
The weights are on the correct chains. When I push the pendulum it ticks to one side and then makes a funny sound as it goes to the other side, and in a couple minutes stops.
I ordered some clock oil and will try that first but wonder what may be wrong. I don't want to spend the $500 to $600 to have it adjusted/fixed.
I figure I would try to fix it myself or buy an entire movement, you can get them around $400 and replace it. But thought I would ask for any thoughts also does anyone know of any decent clock repair people around SE Mass/RI who are not that expensive?
