Silver wire for coil wind is this better than copper

R-bass

Jr. Member
Joined
Dec 28, 2008
Messages
29
Reaction score
0
Golden Thread
0
Since silver is better than copper in conductivity then would silver be better in a coil in depth and sensitivity.
Think about it most silver coins give really good sound when you find. So what kind of gain would you get
with silver wire in a coil
 
Upvote 0
Silver coil windings = larger electromagnetic field.
 
Slingshot said:
Silver coil windings = larger electromagnetic field.

Larger Electromagnetic field = more depth!

Al
 
My question is that with silver winding, how would the detector react to a silver coin? Might be a stupid question but I thought I would ask anyway.

Sniper
 
Silver is the best. That's why satellites cost so much. But I do wonder what a coil made with silver wire would cost. Also, it is a better conductor, but would it give a bigger field? :dontknow:
 
During WWII, in order for the scientists to enrich enough Uranium for the A-bomb they had to make the largest electromagnet ever built. It would be called a Calutron and they needed many tons of copper wiring which they claim was not available at the time due to war shortages. Instead of copper they went to the US Treasury and "borrowed" 14,700 TONS OF SILVER. 14,700 tons of silver is about 470,000,000 ounces that were taken from the US vaults, made into silver wire and "busbars", and installed into the greatest secret project in the history of the world. Let's call that "deep storage silver" because, theoretically, the calutrons could be removed and the silver melted back into bars. As a matter of fact, according to the program and government statements, that is what was done in 1954.
 
Without knowing exactly how much copper is in a standard coil let just say 6 ounces. Six time the price of silver per ounce. That really does not sound like a lot more in actual cost. There may be technical features that would prevent it's use in a coil. Copper is harder and stronger than silver so it could have fatigue issues. One break and it becomes useless. I am pretty sure that the manufacturers have looked into using silver to get better depth. But as far as I can guess there are no silver coils being produced.
 
I'd have to agree with you Big61Al.

With the coil accessories they sell, the double D's, spider configurations, etc...and none are that cheap....I'm sure they must have experimented with silver knowing if they did perform that much better, we'd all buy them even for a couple hundred more than what we pay for the better coils now.

Or have they????

Wouldn't you be willing to spend maybe $300.00-$400.00 if you knew that coil would go another 5" in depth compared to any already on the market?...Without having a 15" coil?...just a standard 9"-10"?

Al
 
The magnetic fields are deep enough now, increasing the field wouldn't help. For example my MXT will read a trash can at 3 ft easy. That means the field is already 3ft. That's why we need small coils and have to turn down the gain in tot lots to get close to the equipment. With a large coil it's hard to get within 2 ft of the metal posts so again the field is reaching at least that distance. My VLF (MXT) won't read a dime at 3ft because it is not sensitive enough to read the dime. So the sensitivity is the limiting factor not the field. Rob
 
rcasi44 said:
The magnetic fields are deep enough now, increasing the field wouldn't help. For example my MXT will read a trash can at 3 ft easy. That means the field is already 3ft. That's why we need small coils and have to turn down the gain in tot lots to get close to the equipment. With a large coil it's hard to get within 2 ft of the metal posts so again the field is reaching at least that distance. My VLF (MXT) won't read a dime at 3ft because it is not sensitive enough to read the dime. So the sensitivity is the limiting factor not the field. Rob

Good point...that's what's so great about this forum...varying points of view.

Another 5" deep, or a broader field does mean a wider field in general...and getting close to fences and whatnot....well...

If they could only make a coil with a one way field...straight down...now we're talking.

Al
 
R-bass said:
Since silver is better than copper in conductivity then would silver be better in a coil in depth and sensitivity.
Think about it most silver coins give really good sound when you find. So what kind of gain would you get
with silver wire in a coil

Won't make any difference.

- Carl
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom