smaller coil??

[saralo123]

I have a question for more experienced members. I have a whites coinmaster gt and I'd like to purchase a smaller coil. I've been detecting at old home sites but I'm finding it difficult sifting through the hundreds of signals I'm getting. I can't dig them all and they are close together and I'm having a hard time discriminating with my coil. What coil would you guys reccomend. Thanks.

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[airscapes]

There is only one coil from whites for the CM 8kHz machines other than the stock 9". The other is the Prizim 4x6 shooter. It is what you would want for your task. It will only go about 6" down due to it's small size but you can get in between lots of stuff. NEL also makes a small round which would work well and is a lot less money. Make sure you buy a lower shaft and pivot nut/bolt as well so you can change them quickly. I had some problems with a couple of bad 4x6 from whites, but the dealer I used took good care of me. Give Phil a call for prices on both the NEL line of coils and the Prizim 4x6. Myers Metal Detectors
You would want the 5" round NEL SHARP NEL-Coils for Metal Detectors - Gold Digger Metal Detectors, Raritan, New Jersey but I think the 4x6 would be better but more expensive.
If you still have questions, PM and we can set up a call.

 

[saralo123]

Thanks Doug. I took your advice and got the 4 x 6 from Whites. It is awesome in trashy areas. Appreciate the good info.

 

[airscapes]

Thanks Doug. I took your advice and got the 4 x 6 from Whites. It is awesome in trashy areas. Appreciate the good info.

No problem! Glad it worked out for you on the first try! I had some issues with defects.