tnsharpshooter
Bronze Member
- #1
Thread Owner
Some folks may be looking at this detector,,and notice all the different modes,,thinking this detector could be too complicated for them.
Well, it is only as complicated as you want to make it.
For many folks even beginners,,,you may only use a few modes,,and as your experience or skills develop,,,using some of the other modes,,,you'll eventually try.
There are 2 modes on the detector that are very simple to operate,and will get you up and running finding things .
The DI99 mode is a third mode,,I feel will also get a person digging treasure in short order.
This detector even with factory default gain settings is a worthy performer.
With the menu system,,,and the ability to save your settings,,hard to get lost,,,,when you first arrive at your site and are beginning to hunt. Detector also provides a simple way to revert back to factory default settings if a person desires,,or gets confused.
Saying all this,,yes some experience with using the detector will definlitely be necessary to reach the maximum to near maximum capabilities of using this detector for overall performance while in the field.
Also,,having both the stock and smaller coils for this detector will definitely open up your overall detecting potential with this device.
I also feel should a beginner consider this detector,,,having the smallest coil attached,,will provide an overall faster learning curve.
Heck,,I got some experience,,it even helped me.
I would like to get this mid sized coil and give it a go.
Folks should also realize,,and beginners follow closely hear,,,the manufacturer added to this detector,,,a feature that normalizes target identification,,,meaning say a coin,,like a dime,, will read the same ID or vdi even in all frequencies. So for the folks who want less to keep up with say coin ID wise,,this will help you.
Also,,,for those who may be timid when it comes to the Internet update able capabilities this detector possesses,,,if after the manufacturer get the process set up on their website,,,,if this process developed,,,is anything like the process I have been subjected to as a tester--- very easy to do.
If a person can read,,they should be able to accomplish.
A person not having a computer,,,and is wanting to purchase this detector,,,all you need is a friend or relative that has a computer,,,and you can do update if needed using theirs.
Folks will be supplied the needed cable to perform update using computer.
I feel like I am a good person here to say what I have here about this detector.
Why?
Guess what my first detector was??
A White's V3i detector.
And my second detector was Minelab etrac.
So I have some experience here to draw on,,,when addressing this detector for beginners.
Well, it is only as complicated as you want to make it.
For many folks even beginners,,,you may only use a few modes,,and as your experience or skills develop,,,using some of the other modes,,,you'll eventually try.
There are 2 modes on the detector that are very simple to operate,and will get you up and running finding things .
The DI99 mode is a third mode,,I feel will also get a person digging treasure in short order.
This detector even with factory default gain settings is a worthy performer.
With the menu system,,,and the ability to save your settings,,hard to get lost,,,,when you first arrive at your site and are beginning to hunt. Detector also provides a simple way to revert back to factory default settings if a person desires,,or gets confused.
Saying all this,,yes some experience with using the detector will definlitely be necessary to reach the maximum to near maximum capabilities of using this detector for overall performance while in the field.
Also,,having both the stock and smaller coils for this detector will definitely open up your overall detecting potential with this device.
I also feel should a beginner consider this detector,,,having the smallest coil attached,,will provide an overall faster learning curve.
Heck,,I got some experience,,it even helped me.
I would like to get this mid sized coil and give it a go.
Folks should also realize,,and beginners follow closely hear,,,the manufacturer added to this detector,,,a feature that normalizes target identification,,,meaning say a coin,,like a dime,, will read the same ID or vdi even in all frequencies. So for the folks who want less to keep up with say coin ID wise,,this will help you.
Also,,,for those who may be timid when it comes to the Internet update able capabilities this detector possesses,,,if after the manufacturer get the process set up on their website,,,,if this process developed,,,is anything like the process I have been subjected to as a tester--- very easy to do.
If a person can read,,they should be able to accomplish.
A person not having a computer,,,and is wanting to purchase this detector,,,all you need is a friend or relative that has a computer,,,and you can do update if needed using theirs.
Folks will be supplied the needed cable to perform update using computer.
I feel like I am a good person here to say what I have here about this detector.
Why?
Guess what my first detector was??
A White's V3i detector.
And my second detector was Minelab etrac.
So I have some experience here to draw on,,,when addressing this detector for beginners.
Amazon Forum Fav 👍
Last edited:
