teknetics delta 4000

[skeeter86]

Any tips for adjusting this machine would help .

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[BugsyDiggs]

Start with the sensitivity on 4 and go from there.
It chatters a lot where I am at if I run it over 6.
Should start pullin clad and rings at a low setting and maybe notch foil out. Good luck with it . mine works great.

 

[pj_fan72]

keep bumping up the sensitivity until it gets chattering, then take it down 1 notch. Then you'll maximize your depth. I agree notch out foil

 

[mapper123]

I have a D4000 & with sensitivity set at 4 I still get some chatter.....is there a way to lower the sensitivity even more?

 

[deliveryboy]

I have a D4000 & with sensitivity set at 4 I still get some chatter.....is there a way to lower the sensitivity even more?

as far as I know 4 is the lowest you can go, try a different area and see if it might be EMI

 

[relicmeister]

When you notch out foil aren't you afraid you will miss small gold items?