This guy needs help.

roaddust66

Hero Member
Joined
Sep 22, 2013
Messages
608
Reaction score
342
Golden Thread
0
Location
Chattanooga Tennessee
Detector(s) used
Impact , Tejon . Fisher F75, Vaquero, uMaxSilver, Cibola , Delta 4000, F2, Ace350 , original Bandido
Primary Interest:
Relic Hunting
The rock has metal content in it, nothing you can see. We call them "Hot Rocks". The Bounty Hunter can't see the metal content as it has filters that block the metal out. The Tesoro is way more advanced and sees the rock. The bad thing about having an advanced detector is it sees most things if all controls are turned down. Neither detector is broken and the Banito is designed that way with the knobs. To reset the knobs, turn two turns clockwise and then back One and ahalf and your all set.

Come on guys, this isn't a hard question for you to help him. Why wait for me to get out of PT.
Sandman
 

Poor guy, he just needs to research his Bandido, not a hard thing to do. He could call Tesoro and talk to the good people there
and they will send a manual to him pronto. The Ground Balance control has a ten turn adjustment, it has no mechanical stops.
A lot of people get confused over this adjustment, I have tried to help some people on the internet forums on this simple adjustment and some still
do not get it. Oh well.
Once learned, the Bandido will out hunt even the high dollar machines in the relic type places with lots of nails in the ground. With a small 5.75 concentric
coil, I would put it up against any detector known for un-masking in the iron. AT Pro, E Trac, V3i, Extera, does not matter, the Bandido simply kicks booty.
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom